https://www.nevadaradio.co.uk/antenna-accessories/antenna-components/palstar-so239 Hi all If I ran 300 ohm ladderline into one of these (see...
Hello- I have a "True ladder line" brand 10-80 doublet antenna. It is fed with 600-ohm ladder line. I have not installed it yet, and I'm...
I currently don't have a shack setup but I've got some plans to hopefully be up on HF before spring. I'm going to be using 450 ohm ladder line up...
Specs: 2 2.4"x.5" stacked ferrite cores. Mix 52 material Two layers Scotch 27 glass tape > 6kV insulation Bifilar windings #14 thermalize wire...
Hi all Looking to try out one of these in my incredibly small yard space. No room for radials or much of a horizontal antenna (15 feet of space)....
Hi all I am planning to install a 44 foot doublet fed by 300 ohm ladder line into a 1:1 or 4:1 balun and a remote tuner. The antenna is at the...
I have a 10-40m trap dipole I built myself, using Unadilla traps. The last leg is 40m with no trap on the end--so its using a 10, 15, and 20m...
I live on a tree-less 20-plus acre lot in southwest Utah (700 feet x 1400 feet). What are pros/cons of putting up a doublet antenna (center-fed at...
For a limited time, I am offering 20% off all feedline and antennas. These are all made by mentally-challenged adults with approximately 10% of...
Bacon Lettuce and Tomato... or is that Balanced Line Tuner? Matches balanced loads without the use of lossy baluns. Being a parallel resonant...
I am a newer operator looking for advice on what may be a matching problem between my 140' doublet and a new MFJ 974HB balanced line tuner. Any...
Brian here, WB2JIX. I am carrying on the tradition of selling the original 600Ω open wire line as well as full size doublets. They are still made...
