I'm familiar with most of the Cushcraft antennas but I haven't operated UHF very much so I haven't got much experience in that band. A fellow ham...
[ATTACH]
I have been looking at vertical HF antennas and would like to hear some feedback from those who may be using them. What manufacture do you...
Hi friends! The bottom most radiator tube found slightly bent from the bottom end (held in fiberglass-f/g-base) in an old R7 vertical antenna. The...
I have a Cushcraft A449-11S 70 cm, 11 element Yagi antenna, vertically mounted. I would like to stack one on top the other vertically. My question...
The assembled antenna looks like, e.g, the A148-20T since it has an 11 foot boom. However, the element spacing is 14" and the vertical and...
I have an older Cushcraft design 222 beam with the gamma match. I'm guessing its 20+ old. I'm rebuilding it and broke the first element. Worst...
Looking into getting an ICOM-7610, (already have a 7100 for the car) but I’m going to need a good HF antenna for the house and would rather start...
Hello, I'm doing a little article about the R7 cushcraft. I had information and dimensions of the traps for the model 1994 (with trap 20M unequal...
I have an extremely limited space in which to set up an antenna in the backyard and I am on a very limited budget...so towers are out of the...
Hi everyone, I have on my hands a used MA5B mini beam antenna that has a problem on the MT3 trap...so whould like some photos on the inside of...
This 3 band antenna is quite nose heavy (boom to mast) when mounted according to the instructions. I'm wondering if the design engineers assumed...
While following the "ant" trail of information from various folks, I ran across a post from N1RND that detailed the proper RFC (BOURNS JW MILLER...
I inherited a cushcraft beam antenna from an estate. It seems to be a tri-band beam antenna but it needs a few parts. I cannot seem to find and...
I have parts of an older 440 antenna that I inherited from my father who is now a silent key and am hoping that someone here might help me...
In this part2, i show the configurations i tried with this Cushcraft 13b2 VHF yagi, and the differences between horizontal and vertical...
Well I just got my Glenn Martin 40 foot Tower (18in) (ham4) with hazer up and ready to go. Now I need a 5 band beam for it. My fallback is a hex...
[ATTACH] Hi All, I am thinking about ways to put up an HF beam. One way that might work is mounting the antenna to my chimney. The chimney is...
I need some repair parts for my Cushcraft A4S. This is my first time contacting MFJ. How long do they usually take to respond to parts requests?...
Has anyone faced this issue (major SWR jumps) with a late model trapped Cushcraft or HyGain HF antenna, and if so, were you able to solve the...
