Yaesu FT-757GX Replacement CPU

Discussion in 'Amateur Radio News' started by W9GB, Jul 21, 2010.

Thread Status:
Not open for further replies.
ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: Left-2
ad: Subscribe
ad: Left-3
ad: MessiPaoloni-1
  1. W9GB

    W9GB Ham Member QRZ Page

    DO NOT TRASH those Yaesu FT-757GX trasnceivers with a bad CPU !!

    HED radio has developed a replacement uProcessor and firmware for the Yaesu FTY-757GX. The original CPU is no longer available from Yaesu.

    This work builds upon a earlier replacement effort by Daniel, VK2TRP in 2006.
    Klaus, DL8NAT and DG1NMT shoudl be thanked for this effort and service
    http://www.hed-tafelmeyer.de/en/ft-757en.html

    HED Tafelmeyer Germany
    Inh. Matthias Tafelmeyer
    An der Steige 13d
    90614 Ammerndorf
    Tel.: +49(09127) 59 48 66

    They also make the Replacement module for IC on Yaesu
    counter-unit PB-2086, PB-2098 or PB-3430

    This counter / frequency display unit was used on the
    Yaesu FT-101ZD MarkII, FT-101ZD MarkIII, FT-107, FT-707, FT-901 (late series) and FT-902 transceivers.
    ====
    w9gb
     
  2. WA6MHZ

    WA6MHZ Premium Subscriber QRZ Page

    They should also look into making new uPs for the ICOM IC-211, 245, 701, 740, 745 , etc. line that are also very UNOBTANIUM! Many of those are lying DOA because the uPs are Kaput! The 211 has a 40 pin DIP, so that is a convenient package. Newer uPs are SMT packs which would be very difficult for even the best reworkers to replace. We can do it here at the plant, but I wouldn't dare try it at home!
     
  3. PY1RN

    PY1RN Guest

    flat cablle for board yaesu ft 101e

    I need flat cablle extend of yaesu ft 101E.
     
Thread Status:
Not open for further replies.

Share This Page