Yaesu FT-2800M PTT Beep

Discussion in 'Community Help Center' started by VE7GLS, Feb 10, 2009.

Thread Status:
Not open for further replies.
ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: Left-2
ad: QSOToday-1
ad: Subscribe
ad: abrind-2
ad: Left-3
  1. VE7GLS

    VE7GLS Ham Member QRZ Page

    I have recently acquired an FT-2800M. Everytime I key the mic it beeps. This quite annoying. I have looked through the manual and can not find any referance to this beeping problem. I anyone knows of a solution to this, please reply.

    Thank you
    &
    73's

    VE7GLS
     
  2. AC0FD

    AC0FD Ham Member QRZ Page

    Beep?

    From page 18 of the manual

    1. Press and hold in the [MHz (SET)] key for one second, then rotate the DIAL knob to select "03 BEEP."
    2. Press the [MHz (SET)] key, then rotate the DIAL knob to set the display to "OFF"
    3. Press and hold in the [MHz (SET)] key for one second to save your new setting and exit to normal operation.

    The other menu that talks about a beep is 12.
     
  3. VE9SY

    VE9SY Ham Member QRZ Page

    Make sure Wires is not activated. Press the wires button on the front of the rig to turn it off if it is. Or the 0 key may do the same.
     
Thread Status:
Not open for further replies.

Share This Page