ad: Radclub22-1

Yaesu FT-2000D Service Issue

Discussion in 'Radio Circuits, Repair & Performance' started by N2GHX, Nov 27, 2021.

ad: L-HROutlet
ad: l-rl
ad: Left-3
ad: Left-2
ad: L-MFJ
ad: L-Geochron
ad: abrind-2
ad: l-BCInc
  1. N2GHX

    N2GHX Ham Member QRZ Page

    Happy Thanksgiving to all...
    My FT-2000D turned on this morning but all controls were inoperative. I removed all power and tried it again with same result...turns on but everything unresponsive. Then, did a fast/lock reset with no improvement. Turned it off...removed power again...turned it on and now with the external power supply indicator lit, the FT-2000 can be heard clicking with the transceiver Power button pushed in but it will not turn the rig on. Tried to turn on but will not actually turn on. any ideas?
    Thanks...Ken N2GHX
    my enail is n2ghx@aol.com
     
  2. W9GB

    W9GB Ham Member QRZ Page

    Earlier QRZ Q&A Thread (July 2015)
    https://forums.qrz.com/index.php?threads/ft-2000d-ps-question.487393/
    At that time, WB2WIK noted:
    ==
    Service Manual required for ANY Service attempts (includes FP-2000 parts, diagrams).
    The radio is largely Surface Mount components and power supply a mix of thru-hole and SM technologies.
    Yaesu FT-2000D Service Manual (220 pages) can be downloaded (25.7MB) from MODS.DK

    Yaesu FT-2000D Operating Manual
    https://www.yaesu.com/airband/downloadFile.cfm?FileID=6184&FileCatID=158&FileName=FT-2000D_OM_ENG_EH025H142.pdf&FileContentType=application/pdf
     
    Last edited: Nov 27, 2021
  3. WD8BWW

    WD8BWW XML Subscriber QRZ Page

    Try the following: unplug "everything" from radio except the power supply. Power it up. Also do a master reset with everything unplugged. Keep us posted.
     

Share This Page

ad: elecraft