YAESU 7800R Transceiver

Discussion in 'VHF/UHF - 50Mhz and Beyond' started by W3XAF, Dec 24, 2014.

Thread Status:
Not open for further replies.
ad: L-HROutlet
ad: l-rl
ad: Left-2
ad: L-Geochron
ad: abrind-2
ad: Left-3
ad: MessiPaoloni-1
ad: HRDLLC-2
ad: L-MFJ
  1. W3XAF

    W3XAF Premium Subscriber QRZ Page

    [TABLE]
    [TR]
    [TD]
    [/TD]
    [TD="width: 85%"]Does any one out there know how to manually set a repeater CTCSS tone PL transmit frequency using a FT-7800R? The repeater I want to use is connected to the US WAN and has a PL tone frequency of 72 Hz. Menu 44 of the FT-7800R does not allow the user to set a PL frequency of 72 Hz. The closest frequency available is 71.9 Hz and that is not good enough!!!
    [/TD]
    [/TR]
    [/TABLE]
     
  2. K2NCC

    K2NCC Ham Member QRZ Page

    I have a couple of 7800s. Probably is good enough, there is no "stock" PL of exactly 72 that I'm aware of. Use 71.9, which is probably what the repeater folks meant to say anyway.
     
Thread Status:
Not open for further replies.

Share This Page

ad: Momobeam-1