WSJT-X and IC-706 band tuning problem

Discussion in 'Amateur Radio Software' started by ZS1OA, Feb 1, 2020.

ad: l-rl
ad: l-BCInc
ad: Subscribe
ad: Left-2
ad: Left-3
ad: L-MFJ
ad: abrind-2
  1. ZS1OA

    ZS1OA Ham Member QRZ Page

    Hi Guys.

    I have a odd problem with the CAT control on my IC-706 when I want to operate WSPR on 30 meters (10 138.700 KHZ).

    Every other band I select for WSPR operation the rig tunes in correctly with the exception of the 30 meter band. When I select this band the rig tunes to 15 425.900 KHZ and not 10 138.700.

    I have two IC-706 rigs and both are doing exactly the same thing. The address for the rig is 48 Hex at 1200 baud 8 bits 1 stop bit and no parity bit. I am running version 2.1.2. on a 32 bit XP system.

    HRD has no problem tuning the rig to any frequency it is only WSJT-X in WSPR mode on 30 mtrs that goes pear shaped.

    Have any of you had this problem before and is there a fix for it?

    Kind regards,

    Peter Saul (ZS1OA)

Share This Page