Discussion in 'Mac Ham Radio on macOS & iOS' started by EA3HOE, Dec 9, 2016.
That is cool, I know that was a fix for Windows 10 too.
Good work, Nice find.
As an update to this;
I have further found that the "real" problem with the audio into WSJT-X may be related to Stereo audio coming in / out of the USB Audio ports.
In the Midi settings on OSX, I set the USB Audio parameters to 1 Channel, 48000Kbits for both in and out. Once I have changed this setting, OSX/WSJT-X works just fine, with or without the USB Hub. This setting appears to be automatically reset whenever you disconnect the cable, power down the radio etc. so it needs to be reset prior to each session.
I can confirm that adjusting the Midi settings as per KN4GPT post has worked for me, where all other suggestions failed.
Late 2011 MBP running 10.13.6, and WSJT-X 2.0.1 into an Icom 7300.
Reviving this thread....
Having the same problem with my Icom 7200, 2010 21" iMac, and macOS Sierra...
I adjusted the Midi settings as KN4GPT recomended: "In the Midi settings on OSX, I set the USB Audio parameters to 1 Channel, 48000Kbits for both in and out"...
It worked with: 1 ch 8-bit Integrer 48.0 kHz and 1 ch 16-bit Integrer 48.0 kHz.
Finally after 4 months of struggling with my old iMac, and new to me ic7200, the problems has been solved!
Hi guys, what good information you have here.