Tiny2 Mk2 TNC Firmware.

Discussion in 'Amateur Radio Software' started by GM7FGH, Jun 20, 2020.

ad: L-HROutlet
ad: l-rl
ad: Left-3
ad: QSOToday-1
ad: Subscribe
ad: abrind-2
ad: Left-2
ad: L-MFJ
  1. GM7FGH

    GM7FGH Ham Member QRZ Page

    After many years since last using AX25 Packet I have decided to dig out my old Proccomm Tiny2 Mk2 TNC only to find I require an Eprom for it (27c256). Can anyone tell me where I can get an Eprom or the binary code so I can start playing again.
    Thank you
    73 de GM7FGH
  2. W9GB

    W9GB Ham Member QRZ Page

    Gwyn Reedy, W1BEL (SK, 2006) founded Paccomm in 1985. He passed away 14 years ago.
    While Gwyn’s wife ran the company for a few years, the web site is gone.
    The Tiny-2 Mk2 TNC was based on the earlier TAPR TNC2 design.
    Firmware EPROM for this model do appear on eBay.

    Paccomm Tiny-2 : User Manual

    Paccomm Tiny-2 Mk2 TNC (photo by Owen Duffy)

    The Repeater Builders Technical Information Page (RBTIP) began to collect Manuals and Firmware for TNCs and Multi-Mode Controllers from AEA/Timewave, Siskin, and Paccomm v5.

    Dave, GØOFC (Northampton, England) provided the Paccomm version 5 firmware image.

    Owen Duffy Notes
  3. GM7FGH

    GM7FGH Ham Member QRZ Page

    What a tremendous help this information is to me . I cannot thank you enough.
    Kindest Regards
  4. G1RSW

    G1RSW Ham Member QRZ Page

    I am working from home at the moment (aren't we all?) but I think there are some 256 eproms sitting around at work. If you still need any then give me a shout and I will try and find them for you.
  5. W4GCW

    W4GCW Ham Member QRZ Page

    Are you able to program them or do you know somebody that might? Our club is in need of 4
    EPROMs programmed in KISS mode.

Share This Page