Problem With FSK on a Rigblaster Using MTTY

Discussion in 'Working Different Modes' started by WG2Y, Jan 5, 2021.

ad: L-HROutlet
ad: l-rl
ad: abrind-2
ad: Left-2
ad: Left-3
ad: HRDLLC-2
ad: L-Geochron
ad: L-MFJ
ad: MessiPaoloni-1
  1. WG2Y

    WG2Y Ham Member QRZ Page

    I am trying to get FSK to work with a Rigblaster Advantage into an FT2000 using MTTY. The only thing I can get to happen is the radio keys up and produces the tone. There is no switching between Mark and Space tones. I have even swapped out the Rigblaster for another one my son owns and connected it to a different radio.

    I put a scope on the FSK/CW output on the Rigblaster and I do not see any level switching taking place.

    Here is how MTTY is set up . Under the Misc tab I have the Com-Txd option selected. I have the Radio Command set for FT 2000 and have tried every combination for Flow Control. And have tried both DTR/CTS both on and off. The radios do not even diddle when they key up. I have followed the Rigblaster manual and online documentation with no luck.

    AFSK works great on both rigs. Is there something that I am missing?
     
  2. KM8V

    KM8V Premium Subscriber QRZ Page

Share This Page