ad: Radclub22-1

New to Yaesu Fussion can not connect to repeater

Discussion in 'Digital Radio, DMR, Fusion, Wires, DSTAR' started by KM6HHL, Dec 7, 2021.

ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: abrind-2
ad: L-Geochron
ad: Left-2
ad: Left-3
  1. KM6HHL

    KM6HHL Ham Member QRZ Page

  2. KK9W

    KK9W Ham Member QRZ Page

    PL tones aren't used with digital modes. Make sure you have C4FM (Fusion) turned on and not transmitting in analog mode.
     
    Last edited: Dec 7, 2021
  3. WB8NQW

    WB8NQW Ham Member QRZ Page

    DN in orange should be displayed on the right side of the frequency display for the top display.
     
  4. KD4UPL

    KD4UPL Ham Member QRZ Page

    Put the radio in digital mode and transmit. There really isn't anything more to working thru a Fusion repeater.
     
  5. K8XG

    K8XG XML Subscriber QRZ Page

    And in DN mode you wont see a "kick back" Squelch tail like you would in analog. It will be there but so fast you have to make sure to see it.

    If it offers Wires-X you can hold down the Dx button for a long press and let go and see if it offers rooms or not once it connects [if they are setup]

    Edit: I looked it up on your link, it is a multimode repeater so if someone is using D-star or DMR you will see the S-unit bar but no decode. If you move your 400 to FM mode, you will hear the digital noise.
     
  6. WB8NQW

    WB8NQW Ham Member QRZ Page

    Digital mode is only available on VFO-A. VFO-B will not do digital.
     
    K8XG likes this.

Share This Page