Description: After building two mcHF radio's, and parting one out to help a friend, I've decided to sell the entire setup to fund other radio projects. The mcHF is a small, home-brewed amateur radio project. Firmware is released as open-source and most project files are released as well. Some of the features that the mcHF has are: Standalone and compact embedded transceiver Continuous RX coverage 2-30 MHz 0.5 - 15W output power CW, SSB, AM and FM – transmit and receive. CW sidetone out without transmitting 300/500 Hz CW up to 10 kHz “extra wide” filters for SSB/AM reception and adjustable passband centering Also implemented are additional filtering options such as LPF & BPF specific filtering. Each selectable in all bands & modes. SSB/AM Transmit Speech processor DSP noise reduction DSP automatic notch filter Noise Blanker & Peak Bass & Treble specific values for better usability. SWR, PWR, and S meter. Split VFO operation Spectrum scope with multiple color & display options Waterfall Display with configuration options for speed, freq width, and more Optional touchscreen integration is possible. Cat control & USB Audio functionality Included in the sale are the following components: Images are in order of this list and a video is available at the bottom. (1) Complete & Functional mcHF radio (1) Partially filled UI board (bad CPU trace as visible in picture, but usable components) (1) UI Board with CPU only (1) 98% complete RF board (needs mic jack if I remember correctly; mic jack included in parts below) (1) Empty RF board (1) Additional case with buttons, speaker holes, knobs, and drilled jack holes (slightly off-set) (2) Internal Speakers with wiring attached (9) Additional RD16HHF1 mosfets; 5 new, 4 used in other kits. 13 TOTAL w/ 4 already on boards Multiple additional toroids, enough for remaining boards. (Count in picture is incorrect as I removed a few for additional project) Over 70 different bags of components for completing the additional kits I will include all current documentation used for building, a listing of the upgrades performed on the completed radio as well as the 95% complete UI board, necessary software to flash new firmware, etc. I will likely not split this sale up as this is a kit as all items are designed to fit together and there is little chance I'll use these components in another kit. I have over $1200 in parts and supplies. I'm asking $800 and I'll pay the shipping. I am willing to take MTR5B or MTR3B as partial payment. Paypal is preferred.