Price: $175 via PayPal, includes USPS Priority Mail to the Continental US. If you wish to have it shipped to an international location, please contact me to discuss shipping rates. Please contact me at my QRZ email address. Originally purchased from DX Engineering on April 24, 2018. I am selling to help fund a remote ATU to go at the base of my antenna Marketing material: LDG Electronics YT-1200 Automatic Antenna Tuners were introduced to meet demand for a companion tuner to work with the Yaesu FTDX-1200. An included CAT/Power cable interfaces with your FTDX-1200, FT-450D, FT-950 or FTDX-3000. This makes it an integrated tuner powered by the interface cable. No extra power cables are needed for the tuner. Just press the tune button on the tuner and everything else happens automatically. The transceiver mode is set to carrier and the RF power is reduced, a tune cycle runs, then the radio is returned to its original settings. It's just that easy! Additional features include: * RF Power: 1 to 100 watts SSB and CW, 30W on PSK * Latching relays for ultra-low power consumption * CAT/Power interface for FT-450, FT-950, FTDX-1200 or FTDX-3000 radios * CAT thru port for computer control of radio (38,400 baud) * 2000 memories sorted by frequency * 1.8 to 54 MHz coverage (continuous coverage for MARS) * Tunes 4 to 1000 ohms. (16 to 150 on 6-Meters) * SO-239 in and out for dipoles, verticals, beams, G5RV, OCF, Cobra, more * Dimensions: 7.0-in. long, by 7.8-in. wide, by 2.0-in. high * Weight: 2 pounds * Includes 1.5 foot CAT/Power interface cable I'm selling it to purchase a remote ATU to go at the base of my antenna. Purchased new from DX Engineering April 14, 2018. Works as it should and includes original cable, box and manual.