ad: ARR

Kenwood TM-255A No Squelch or Volume control

Discussion in 'VHF/UHF - 50Mhz and Beyond' started by ZL1PB, Jun 19, 2019.

ad: L-HROutlet
ad: l-rl
ad: abrind-2
ad: Left-2
ad: Subscribe
ad: L-MFJ
ad: Left-3
  1. ZL1PB

    ZL1PB Ham Member QRZ Page

    Hits the local repeater ok but the volume is flat out and there is no squelch, I have tried a full re set.
    Can anyone help please.
  2. W6KCS

    W6KCS Ham Member QRZ Page

    Any chance the radio receiver is in CTCSS squelch and the repeater doesn't transmit CTCSS?

    Kenwood CTCSS.jpg
    Last edited: Jun 21, 2019
  3. ZL1PB

    ZL1PB Ham Member QRZ Page

    Thanks for your reply, I do not have a CTCSS board in the radio anjd I would have thought a full reset would take care of that but I will make sure, thank you for taking the time to reply.
  4. W6KCS

    W6KCS Ham Member QRZ Page

    What have you tried so far? Next thing I'd try is an external speaker in case it's a bad internal speaker or bad contacts on the internal part of the speaker connector that connects the internal speaker when no external speaker is plugged in (if it has that type of connector, most radios do).

Share This Page