IF Tap Panadaptor Buffer/Amp for SDR's

Discussion in 'Ham Made Gear' started by KD2C, Jun 18, 2017.

ad: L-HROutlet
ad: l-rl
ad: Subscribe
  1. KD2C

    KD2C Ham Member QRZ Page

    You're very welcome!
     
  2. KD2C

    KD2C Ham Member QRZ Page

    UPDATED INFORMATION:

    The cost is $27 per board plus shipping.

    A Connection Kit is available for $7, this includes:

    15 in. – RG 178 Output Cable
    15 in. – Red & Black 26 AWG Power Connection Wires
    7 in. – 30 AWG IF Tap Wire.
    1 – SMA, BNC or RCA Female Panel Connector (Please specify when ordering)
    1 – 1x2 Strip of Double Sided 3M Foam Tape

    Shipping: US $5 Canada $12 All other countries $16 For up to 3 boards & kits

    For additional information please contact me at: kd2c56@gmail.com

    Thanks again!

    Dave
    KD2C
     
  3. K6JUN

    K6JUN Ham Member QRZ Page

    Do you have one that will work with a Yaesu FT990?
     
  4. KD2C

    KD2C Ham Member QRZ Page

    Yes, the PAT50M5 board will work with the FT-990. Please email me at kd2c56@gmail.com for additional information.

    Thank you for your interest!

    Dave
    KD2C
     
  5. N6RGR

    N6RGR Ham Member QRZ Page

    Dave:

    Anything that might work for an Icom IC-7200?

    Thanks!

    Roger N6RGR
     
  6. KD2C

    KD2C Ham Member QRZ Page

    Yes, the PAT70M5 board will work with the IC-7200. Please email me at kd2c56@gmail.com for additional information.

    Thank you for your interest!

    Dave
    KD2C
     
  7. AA7QQ

    AA7QQ Ham Member QRZ Page

    How about 45 Mhz unit for a TT Pegasus?

    Ed
     
  8. KD2C

    KD2C Ham Member QRZ Page

    Ed,

    The PAT50M5 - 50MHz board will work fine for the TT550 Pegasus. Please email me at kd2c56@gmail.com for additional information.

    Dave
    KD2C
     

Share This Page

ad: vanity