Icom SM-50 won't change frequency on Icom 7300

Discussion in 'Microphones, Speakers & Audio Processing' started by KN4UZN, Jun 13, 2021.

ad: L-HROutlet
ad: l-rl
ad: Subscribe
ad: L-MFJ
ad: abrind-2
ad: l-BCInc
ad: Left-2
ad: l-gcopper
ad: Left-3
  1. KN4UZN

    KN4UZN Ham Member QRZ Page

    Just got a new SM-50 desk microphone. I plug microphone into 7300 and it works except I can't get the buttons on mic to change the frequency. Am I missing something in the settings of radio? I've jiggled connector and I don't think it's a loose connection. Any help would be appreciated.

    Thanks
     
  2. G8FXC

    G8FXC XML Subscriber QRZ Page

    It's not a function I've ever used - will check on mine when I get down to the shack...

    Martin (G8FXC)
     
  3. K7MEM

    K7MEM Ham Member QRZ Page

    I don't have a 7300, but if I am reading the manual correctly, the "Tuning Step" function needs to be turned ON for the push buttons to operate.
     
  4. KN4UZN

    KN4UZN Ham Member QRZ Page

    I figured out my problem!...I had set the keyer to be the microphone buttons so it was disabling them on SSB for the channel changing. Thanks to all for looking!
     
  5. KN4UZN

    KN4UZN Ham Member QRZ Page

    Clarification...the CW keyer I had set way back to be the mic buttons since I don't have a paddle.
     

Share This Page