Caution Icom IC - AT500 HF Automatic Antenna Tuner

Discussion in 'Ham Radio Gear For Sale' started by W7JBM, Mar 27, 2019.

ad: L-HROutlet
ad: l-rl
ad: Left-2
ad: Subscribe
ad: K5AB-Elect-1
ad: L-MFJ
ad: MessiPaoloni-1
  • QRZ
    Important Rules
    Why this post has been flagged with "Caution"

    This listing was flagged with Caution because it did not conform to our swapmeet safety rules.

    We mark all non-conforming posts in this manner, regardless of any previous history or reputation that the indicated seller may have. Every listing is evaluated separately and we always urge extra caution in dealing with sellers whose listings don't conform. This caution notice may be removed if the seller subsequently corrects the problem, the details of which may be noted below.

    Note that even if and when the listing does conform to our safety rules that QRZ does not endorse or recommend any any swapmeet sale or offer.

    Notes: Please look for moderator comments below for the specific reason this listing was flagged.
    Our moderators may remove the caution flag once the listing has been corrected.

    1. W7JBM

      W7JBM Ham Member QRZ Page

      The Icom AT-500 covers 160 through 10 meters with up to 500 watts. The rear panel has four antenna jacks. There is a door on the top panel for adjustments. Comes with AC cord and Instruction Manual, Main Board layout diagram, auto-band switching cables, original box. The Icom AT-500 is an automatic external antenna tuner for 160 through 10 meters. Specific frequency range is: 1.8-2, 3.5-4, 7-7.3, 10-10.5, 14-14.5, 18-18.5, 21-21.5 and 28-30 MHz. Power capacity is 500 watts continuous, 1000 watts PEP. Impedance matching is 16.7 to 150 ohms to 50 ohms resistive. Minimum tune up power is 50 watts. The top panel access cover opens for adjustments for the Auto/Tune Preset switches, preset timers and Preset Indicators. The AT-500 rear panel features one input SO-239 jack and four output SO-239 coaxial antenna jacks. Tune-up time is typically 4 to 7 seconds (3 seconds on the same band). The power requirement is 13.8 VDC or 117 VAC which is selectable from the rear panel. (241x111x300mm 6.4 kg).The AT-500 provides auto-band switching with several Icom transceivers including the IC-720A and IC-730. Price is $449.95 Buyer pays for shipping cost.

      Attached Files:

      Last edited: Mar 27, 2019
    2. K4DVW

      K4DVW Ham Member Volunteer Moderator QRZ Page

      Need call sign in photo of item for sale.
    3. W7JBM

      W7JBM Ham Member QRZ Page

      I have this unit all packed up and ready to ship. I would appreciate it if you would remove this caution label as I was not aware that it was required. I will do it next time.
    4. W7JBM

      W7JBM Ham Member QRZ Page

    5. QRZ
      Important Rules
      Have you read the Swapmeet Rules?

      This forum enforces a set of buying/selling rules for the benefit of all users. Make sure that you're familiar with the rules before posting or replying in this area. Got questons? Contact our moderation team here...

      All Sellers Must Be Verified As of July 1, 2019, only Verified Users are permitted to post in this forum.


    Share This Page