ad: chuckmartin

IC-7000 and software control

Discussion in 'General Technical Questions and Answers' started by N7IOD, Feb 28, 2009.

Thread Status:
Not open for further replies.
ad: L-HROutlet
ad: l-rl
ad: Left-2
ad: L-MFJ
ad: abrind-2
ad: Subscribe
ad: Left-3
  1. KD5RFT

    KD5RFT Ham Member QRZ Page

    It sounds like the PTT is working fine.. you just need to make sure your audio output is working properly. Make sure you have the correct rig blaster cable plugged into the speaker port (or line OUT) on the PC then connect your PC speakers (or headphones) into the "monitor" port on the rigblaster -- you can use this feature to troubleshoot (and then turn them down once all is well) and also listen to multimedia on the PC without having to switch cables -- just be careful not to do it while on the air. If you don't hear data via the speakers, verify your ouput setting in your digital application. It should goto the [your sound board here] speaker port from the list.

    Also try different digital applications to help troubleshoot such as digipan. Once you have _something_ working, it's easy to continue with other apps using the same hardware configuration.

    Nick KD5RFT
    RF Turkey
    Last edited: Mar 10, 2009
  2. VE7SP

    VE7SP Ham Member QRZ Page

    Thanks to all who wrote me on this matter, it now appears that it's all working.
Thread Status:
Not open for further replies.

Share This Page