Hustler 5btv Radials

Discussion in 'Ham Radio Discussions' started by K6BFL, Jun 12, 2019.

ad: L-HROutlet
ad: l-rl
ad: OK1UUad-1
ad: FBNews-1
ad: Left-2
ad: Left-3
ad: L-MFJ
ad: Subscribe
  1. W4NNF

    W4NNF XML Subscriber QRZ Page

    Put it on the ground and put in at least 16 - 20 radials (twice that many would be really good).

    As for retuning? The antenna can be setup to deliver 1.5 - 1 or thereabouts on a portion of any of the bands. HOWEVER...these portions will be fairly narrow--especially on 80. Solution? Use an antenna tuner. Retuning the antenna itself just to move from the CW band to the phone band on 80, for example, is just not practical.
     
  2. WZ7U

    WZ7U Ham Member QRZ Page

    I thought an elevated ground plane needed to be a quarter wave off the ground for maximum efficiency. Mine for 40m is only 20' above ground so not perfect but it does work.
     
  3. WF4W

    WF4W Ham Member QRZ Page

    id say at the distances you'er talking - 16-24" - it would still be considered a ground mount. It's a good portable mount idea but i'm not sure a 5g bucket filled with rocks will have enough weight/width to remain stable without guys. . . maybe look at a tripod mount?
     
  4. KA0HCP

    KA0HCP XML Subscriber QRZ Page

    No. not at all.
     
  5. K7WFM

    K7WFM Ham Member QRZ Page

    I agree. The tilt base works very well.

    I actually gave my 6BTV a 80M resonatorectomy. Really diminished the visibility of the antenna and the 80M performance was really not that good to begin with. Now it's a 5.5BTV. :)
     
  6. KA1GTO

    KA1GTO Ham Member QRZ Page

    I have a tripod which I'm thinking of using for my 5BTV. The installation papers say to have the base no higher than 8" from ground level? Any ideas?

    TNX & 73
    de KA1GTO
     
  7. W4NNF

    W4NNF XML Subscriber QRZ Page

    Length? As long as possible. Don't worry about specific lengths for various wavelengths. Just as long as practical. Bottom line? As many as possible. I started out with 16 with my 6BTV because it was a blazing hot summer. But as soon as it cooled off I added 16 more and noted a distinct improvement. I might even lay out some more sometime, but in the past I've found about 30 to be the sweet spot. :)
     
  8. W4NNF

    W4NNF XML Subscriber QRZ Page

    OUCH! Zombie bit again. :)

    [​IMG]
     
  9. KC3SWL

    KC3SWL XML Subscriber QRZ Page

    I use 16ga stranded thnn wire cut to about 16 ft and have 8 of them attached to my portable base loaded coil vertical.That part has a 8.5 ft vertical element. They are easy to coil up when done. Don't get the solid thnn it's a pain in the A#$
     
  10. WZ7U

    WZ7U Ham Member QRZ Page

    You only wish :p
     

Share This Page