HR2.0 - Yaesu FTM-6000r Mobile Ham Radio Discussion with John Kruk, N9UPC, from Yaesu

Discussion in 'Amateur Radio News' started by KC5HWB, Oct 12, 2021.

ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: l-BCInc
ad: Left-3
ad: abrind-2
ad: L-Geochron
ad: Left-2
  1. KC5HWB

    KC5HWB Premium Subscriber QRZ Page

    In this special edition Lunchtime Livestream, I welcome John Kruk from Yaesu back onto the channel to talk about the new Yaesu FTM-6000r dual band mobile radio. Website link:

    DO1FER, KC7ZXY, M1WML and 2 others like this.
  2. KC7JNJ

    KC7JNJ Ham Member QRZ Page

    Coming from the commercial twoway radio world, it does not make sense to me to not have the microphone connected to the control head. I want to run one cable control cable. Both the microphone and the control head need to be in reach of the driver or operator, both have to be used in the same relative location they might as well be fed from the same relative location. If you’re worried about looking like a trucker don’t wear cowboy boots:p
    W7SJP, 2E0NYH, NK8I and 7 others like this.
  3. KD5BVX

    KD5BVX Premium Subscriber QRZ Page

    Where the mic connects is always a debate - as John said, some request it to be to the head and then others want it to the body. Can’t win.

    I’m glad to see a manufacturer continuing to develop and manufacture radios, especially in this climate and the difficulties the chip shortage and shipping issues has caused.
    KC5HWB and M1WML like this.
  4. KC7JNJ

    KC7JNJ Ham Member QRZ Page

    I have built many cop cars and fire trucks, (emergency vehicles of all types) Besides ambulances and cabs of large fire trucks. I cant think of any of the installers I know who would not want the mic and the control head together. For my ham gear I always set it up so I can pull the control head and mic when I go into a hotel or I am not going to drive my car for a while. Because of the lack of a simple analog dual band radio I am installing a spare FT-857 I have in the truck I just got.
    M1WML likes this.
  5. K1CWB

    K1CWB Ham Member QRZ Page

    As I said in another post, it may not be cutting edge but it fills the gap left by the discontinued 7900 nicely. An analog dual band rig with a detachable face is likely to be in demand and fills a hole in Yaesu's mobile line. I think it's unlikely one rig can ever be all things to all operators and I'm glad the analog segment is getting some attention. I'm not in the market for a mobile at the moment, but is good to see new products coming out.
    KC5HWB, KC7JNJ, KD5BVX and 1 other person like this.
  6. KF0DHQ

    KF0DHQ Ham Member QRZ Page

    What Yaesu needs is something like the Icom IC-9700 but better. Keep the 2m, 70, and 23cm bands then add 1.25m and a wide band VHF/UHF RX frequencies. They just need to make a modern VHF/UHF base station that's not the FT-991.
    AB4IX, KA2BKG and M1WML like this.
  7. 2E0TWD

    2E0TWD Platinum Subscriber Platinum Subscriber QRZ Page

    He’s a good guy, John Kruk. Straight talking at its best.
    KI5AIU and M1WML like this.
  8. M1WML

    M1WML Ham Member QRZ Page

    KF0DHQ likes this.
  9. AD7SK

    AD7SK Ham Member QRZ Page

    If Yaesu needs/wants to run a microphone cable to the radio box, effectively double the length of the current mic cable. It is too short for many vehicles now.

    I do not like BT.
    M1WML and KC7JNJ like this.
  10. KQ1V

    KQ1V Ham Member QRZ Page

    The Big 3 (i.e., Icom, Kenwood, and Yaesu) engineer and design decent radios, yet come up short in the hand microphone. Cheap-o light, flimsy microphones.

    Good piece, Jason, thanks.
    M1WML, KC5HWB and KF0DHQ like this.

Share This Page