ad: k1jek

~Help~ Yaesu FT-847 AF Circuit Board Page needed ~Help~

Discussion in 'Radio Circuits, Repair & Performance' started by VP2EIH, Sep 18, 2013.

Thread Status:
Not open for further replies.
ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: Subscribe
ad: Left-2
ad: MessiPaoloni-1
  1. VP2EIH

    VP2EIH Platinum Subscriber Platinum Subscriber QRZ Page

    My Yaesu FT-847 got an indirect lightening (Static Electrical) hit and is down for the count. :(. I cant find my service manual and have tried Yaesu but there no longer carry it.. Do you or any of your friends have a legible copy of the AF CIRCUIT BOARDS. We have tried the ww web, but the copies are very bad and are not readable!!
    I would greatly appreciate it. My friend (Jim) has it on the work bench (collecting dust) but we don't know where to start since we don't have that 1 AF page of the service manual.
    Let me know if you can assist a brother ham..
    Thanks in advance,
    73 and see you on the bands sometime.
    De Ira-KD4SLM.


    :cool:PS can you pass this around the nets or local ham community etc etc.


    Ph: 904-425-9527 or 146.760 Jacksonville FL kd4slm@hotmail.com
     
  2. W9GB

    W9GB Ham Member QRZ Page

    Page 3-13 : Component placement on AF-CNTL
    http://mcars.us/Manuals/FT-847_Service_Manual.pdf

    Schematic diagram AF-CNTL on 5A-1. Board layouts 5A-3 and 5A-4.
    IF you desire a Higher-Resolution paper copy, number of manual companies sell copies.

    CONTACT Carol Maher, W4CLM at Certified Electronics in Cartersville, GA with specific requests.
    http://certifiedelectronics.org/certifiedelectronics.htm

    Carol, W4CLM sponsors the Fox Tango web site - International Yaesu Users Group.
    http://foxtango.org/foxtango001.htm
    Service Manual
    http://www.foxtango.org/ft-library/FT-Library/nineties/FT-847 service_1.2.pdf
     
    Last edited: Sep 18, 2013
  3. VP2EIH

    VP2EIH Platinum Subscriber Platinum Subscriber QRZ Page

    Hey Gregory W9GB,
    Thanks for the info and steering me in the right direction. I'll contact Carol and go from there.
    73' & God Bless.
     
Thread Status:
Not open for further replies.

Share This Page