Help with WSJT-X, Digi Keyer II, and Ubuntu?

Discussion in 'Amateur Radio Software' started by W6MTR, Sep 27, 2020.

ad: L-HROutlet
ad: l-rl
ad: Subscribe
ad: abrind-2
ad: Left-3
ad: L-MFJ
ad: Left-2
  1. W6MTR

    W6MTR Ham Member QRZ Page

    I'm trying to get an IC-7000 working with WSJT-X on Ubuntu 18.04 with a Digi Keyer II. I have WSJT-X communicating with the radio (it can read the radio's frequency and key it up). However, it looks like the audio isn't going back and forth between the radio and the computer.

    If I disconnect the antenna I see no difference in the waterfall display with the antenna connected or disconnected. Also, I get no power out when trying to transmit (with the antenna attached HI HI).

    I have selected the following for Soundcard Input and Output:
    Input: alsa_input.usb-microHAM_microHAM_CODEC-00.analog-stereo
    Output: alsa_output.usb-microHAM_microHAM_CODEC-00.analog-stereo

    Any help would be appreciated.
     
    W6MTR, Sep 27, 2020
    #1
    K1XH likes this.
  2. K1XH

    K1XH Ham Member QRZ Page

    I'm having the same sort of problem, except my receive audio is fine.
    Win10 with a RigBlaster Pro and an FT-100D
     
    K1XH, Sep 27, 2020
    #2

Share This Page