Has anyone used the Yaesu DR-2x 10 pin mini din Accessory port for linking

Discussion in 'General Technical Questions and Answers' started by KC2YTD, Mar 3, 2020.

Tags:
ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: Subscribe
ad: Left-2
ad: OK1UUad-1
ad: Left-3
ad: FBNews-1
  1. KC2YTD

    KC2YTD Premium Subscriber QRZ Page

    Hi,

    Has anyone used the Yaesu DR-2x 10 pin mini din Accessory port for linking audio paths for linking radios and EchoLink. We are exploring disconnecting our Arcom controller RC210 from the DB15 pin I/O connector and use the internal controller instead. The idea being to take the audio i/o from the RC210 port one and connecting to the 10 pin mini din acc port. Port 1 (db15 pin 11) and Port 2 (db15 pin 12) logic levels would be controlled using a logic table controlled interface listening to pins 3 and or pin 4 of the DB15 pin connector.
    I have been told it should be a solution to providing communications to all three of our repeaters leaving what we have intact be able to use C4FM keeping the analog users happy. We use a UHF Hub repeater and three linking simplex transceivers all analog of course.

    Gary
    KC2YTD
     

Share This Page