FT891 + EasyDigi need help to setup with PC & WSJT-X

Discussion in 'Working Different Modes' started by TI2GBB, Feb 22, 2021.

ad: L-HROutlet
ad: l-rl
ad: Left-3
ad: HRDLLC-2
ad: Left-2
ad: abrind-2
ad: MessiPaoloni-1
ad: L-MFJ
ad: L-Geochron
  1. TI2GBB

    TI2GBB Ham Member QRZ Page

    Hello there,

    Regards from Costa Rica, this is TI2GBB Greg, I bought my rig yaesu FT891 for mobile HF/expedition operations last year, I bought also the EASY DIGI interface https://www.ebay.com/itm/EASY-DIGI-...47be94db7f04385edb3a|ampid:PL_CLK|clp:2334524


    I have been trying to setup my rig with my Windows 10 Laptop in order to use this with WSJT-X. I did several attempts without no success, for this reason I'm writing this post in order to get feedback and some light and guidance, I want to use this radio to operate FT8 and in the next 6months RRTY and PSK31, I would appreciate any advice and if someone have experience in the past using the same setup it will be great in order to have the reference of how to configure this radio+interface+ PC.

    Just one thing, I have setup the Yaesu drivers on my laptop and I have tried to get connectivity between the software ( WSJT-X) and the radio but it never worked. I don't know if I'm missing something in the config.

    Thanks in advance!

    TI2GBB - Greg
    San Jose, Costa Rica
     

Share This Page