SOLD FT-991 with extras

Discussion in 'Ham Radio Gear For Sale' started by KF3FRK, Aug 11, 2018.

Thread Status:
Not open for further replies.
ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: Left-3
ad: l-assoc
ad: Subscribe
ad: Left-2
ad: MessiPaoloni-1
  1. KF3FRK

    KF3FRK XML Subscriber QRZ Page

    Very good condition FT-991 purchased new from Gigaparts in June 2016. It has served me very well, I've worked 162 countries with this radio and a wire antenna. Perfect working order, only selling because I managed to upgrade and can't justify keeping this one.

    I'm also including the RT Systems programming software, the FT-991 Nifty guide, and an Elite Dust Cover made by Stan at The dustcover has my callsign embroidered on it but otherwise you will love it.

    The 991 comes with the original box, manual, and all original accessories (full length DC power cord, hand mic, USB cable, spare fuse)

    Price is $750 shipped (FIRM) to the US, payment by USPS or Paypal.

    Email with questions or for more pics.

    Attached Files:

    KE0EYJ, KA8UGB and K5MTY like this.
  2. KF3FRK

    KF3FRK XML Subscriber QRZ Page


    The FT-991 is the next generation in all mode, all band MF/HF/VHF/UHF transceiver with C4FM (System Fusion) Digital capability. The FT-991 includes multi-mode operation on CW, AM, FM, SSB, and Digital Modes (Packet, PSK31, RTTY and C4FM), with 100 Watts of HF/50mhz Capability (50 Watts VHF/UHF).

    The New FT-991 now includes a high-resolution full color 3.5" TFT Touch panel for superior operability and visibility, incorporating a High Speed Spectrum scope with ASC (Automatic Spectrum-scope control) built right in.

    The FT-991 is designed for the most competitive operating situations, with a suite of new features to enhance the experience. Whether you primarily operate at home, mobile or in the field, the FT-991 will provide outstanding fundamental performance plus give you easy access to the full range
    of exciting modes available on the ham bands today.

    State of the Art Digital Signal ProcessingRecognizing an all-important Golden Rule Amateur Radio - “You cannot work them if you cannot hear them”– the FT 991 features a rugged state-of-the-art highly balanced receiver circuit configuration. The high-speed floating point TMS320C6746 DSP chip (3000 MIPS / 2250 MFLOPS) from Texas Instruments used in the receiver design guarantees excellent interference rejection with actual signals under real-world conditions, not only on HF but also in the VHF and UHF bands.Selectable 3 and 15khz roofing filtersThe 1st IF frequency incorporates selectable robust 3 kHz and 15 kHz roofing filters that effectively attenuate interfering signals. The triple conversion circuit structure allows highly flexible gain distribution at each stage. This proven receiver design architecture enables elimination of unwanted signals through filters at each stage as well as optimized gain distribution.Automatic Spectrum-Scope (ASC)Advanced Spectrum Scope with ASC (Automatic Spectrum-Scope Control) located just below the LCD display gives the operator all the information for comfortable QSO on the DXing scene.3.5" Full Color TFT DisplayThe FT-991 could not provide functions easier than at your fingertips with a 3.5" Full Color TFT Display for Superior Operability and Visibility.USB CapableThe FT-991 can be connected to a computer using a USB cable for CAT control and firmware updates, or the use of an integrated SCU-17 Interface Unit to support USB Audio In/Out, TX Control (PTT, Key, Shift).100 Watts of Solid PerformanceThe RF Amplifier in the FT-991 provides a clean and solid 100 Watts of Operating Power (50 Watts VHF/UHF) and is combined with a large heat-sink and forced air automatic cooling fan to increase operating time and prevent overheating.Compact, Lightweight & PortableThe FT-991 Comes in a compact, lightweight package suitable for portable, mobile and base installations. Measuring 8.8"(W) x 3" (H) x 9.9" (L) at just 9.7 pounds this robust full featured mobile/portable radio is ready to go when and where you are!Internal Automatic Antenna TunerInternal High Speed Automatic Antenna Tuner included in the package. The antenna tuner uses a LC switching network that has a large capacity 100 channel memory. The tuning data is automatically memorized to reduce tuning time when changing frequency.High Accuracy TCXO+/-0.5PPM High Resolution DDS/PLL local Oscillator included as part of the standard package.SpecificationsFrequency Ranges: RX 30 kHz - 56 MHz, 118 MHz - 164 MHz, 420 MHz - 470 MHz (specified performance, amateur bands only)
    TX 1.8 MHz - 54 MHz, 144 MHz - 148 MHz, 430 MHz - 450 MHz (amateur bands only)
    Circuit Type: Triple-Conversion Superheterodyne: SSB/CW/AM
    Double-Conversion Superheterodyne: FM/C4FM
    Modulation Type: A1A(CW), A3E(AM), J3E(LSB, USB), F7W(C4FM), F3E(FM),
    Power Output: SSB/CW/FM AM Carrier
    160- 6 Meters: 100 W 25 W
    2 Meters/70 Centimeters: 50 W 12.5 W
    Case Size(W x H x D): 9.0" x 3.2" x 9.3" (w/o knob and connector)
    Weight: 9.5 lb
    N9EAZ, K5MTY and KE9OL like this.
  3. KF3FRK

    KF3FRK XML Subscriber QRZ Page

    The manuf. date on this radio is Feb 2016 (serial number starts with 6D, after issues with finals on early models were fixed by Yaesu)
  4. KF3FRK

    KF3FRK XML Subscriber QRZ Page

    Radio is SOLD
  5. QRZ
    Important Rules
    Have you read our Swapmeet Rules?

    This forum enforces a set of buying/selling rules for the benefit of all users. Make sure that you're familiar with the rules before posting or replying in this area. Our moderators review every post in this forum and will flag or delete those that do not conform.

Thread Status:
Not open for further replies.

Share This Page

ad: UR5CDX-1