FT-991 JT65 with computer

Discussion in 'Working Different Modes' started by KV3D, Apr 4, 2015.

ad: L-HROutlet
ad: l-rl
ad: Left-2
ad: L-Geochron
ad: abrind-2
ad: MessiPaoloni-1
ad: HRDLLC-2
ad: L-MFJ
ad: Left-3
  1. W0IY

    W0IY Ham Member QRZ Page

    This is an old thread, but has anyone made HB9 JT65 work on FT991 WITH the native FT USB interface?
    email me direct or post here.
  2. KH2G

    KH2G Guest

    I believe DAKY = Data Key which may be the cmd you need.
  3. KD4ADC

    KD4ADC Ham Member QRZ Page

    I have made it work. I first made PSK31 work with the native USB interface, then decided to try JT65 and settled on the HB9 version of the software. After some tinkering, all I had to do was change 110 (SSB PTT Select) to RTS and 111 (SSB Port Select) to USB. It appears this was necessary since Upper Sideband mode is used for JT65 rather than Data-USB (as for PSK31).

    Note that 71 is Data PTT Select and 72 is Data Port Select. For PSK31, 71 is set to RTS and 72 is set to USB. It made sense to me to do the same for the SSB settings, and bam I was on the air.

    I hope this helps someone.
  4. N1AV

    N1AV Ham Member QRZ Page

    I have a full write up on my blog getting the FT-991 working with the internal sound card interface and WSJT-x.
    All menus and settings included.

    Jay N1RWY

Share This Page