Discussion in 'Working Different Modes' started by KT4NN, Aug 8, 2015.

ad: L-HROutlet
ad: l-rl
ad: HRDLLC-2
ad: MessiPaoloni-1
ad: abrind-2
ad: Left-2
ad: Left-3
ad: L-Geochron
ad: L-MFJ
  1. K4VLF

    K4VLF Ham Member QRZ Page

    "Also, has anyone done a comparison of the FLDIGI and ZL2AFP FSQ software?"

    I have used them both; they both work fine.

    What I don't know, is why is the audio frequency fixed at 1500 Hz?? What I do, if a couple of guys are using 1500, I tune up on my radio about 500 Hz, and take the next slot. Should be readily visible to anyone looking at their waterfall.
  2. N7ZAL

    N7ZAL Ham Member QRZ Page

    I've aborted the attempt to try it because I have TVI on 20 meters and have to use reduced power. So any digital operation will have to be JT modes.

    Thanks for the feedback.
  3. K0RGR

    K0RGR Ham Member QRZ Page

    30 meters seems to be where the FSQ is, and that is not a bad thing, with coast to coast coverage in the daytime and DX at night....
  4. K6CLS

    K6CLS Ham Member QRZ Page

    You mean like a Raspberry Pi 2, which needs 5v at 200mA to provide that?

    Or maybe your smart phone has all that? Or your wife's Kindle reader?

    Seriously if FSQ catches on I expect to see ports of the software to all kinds of tiny devices.
    KC3BZJ likes this.
  5. KC9UDX

    KC9UDX Platinum Subscriber Platinum Subscriber Life Member QRZ Page

    I expect it still won't be usable on anything with less than 16 bits and 50 MHz. Even that's being generous.

    I'd figure out a way to do it with 8 bits and 1MHz if I had time. And I wouldn't require any updates.
  6. KB3LIX

    KB3LIX Ham Member QRZ Page

    Just downloaded the FSQCall SW and installed it.
    Set up callsign and location fields and pressed enter...That was a mistake.
    I forgot that the SW automatically sends the entered callsign.
    I didn't INTEND to transmit at that time.
    Funny thing though, station in New Hampshire called me back
    and had a nice "chat" with him. (I do not normally CHAT, but I like FSQ..something different)

    Now I have to go back and read the documentation so I can understand
    what I am doing, and not be using the SWAG method.

    Got the new release of FLDIGI too, but don't kinow if I will use FLDIGI.
    I have an older version of FL that works just fine and I use it all the time.
    I may just stick with the old version.
  7. KQ0J

    KQ0J XML Subscriber QRZ Page

    Anyone else notice that the activity on 30M seems to have moved from 10.144 to 10.145 ? Or is it me ....
  8. N9DSJ

    N9DSJ Ham Member QRZ Page

    It depends...10.144 is the "normal" frequency but if that gets busy some migrate to 10.145.
  9. K6SLK

    K6SLK Ham Member QRZ Page

    I have worked FSQ on 10.144. Also have had great success with running FSQ using FM on 2 meters. I have successfully acoustically coupled a Baofeng handheld to my notebook and received/transmitted successfully. Very easy to do. I simply held the Baofeng a few inches from the speaker and microphone on the computer. K6SLK/4
  10. KK6QMS

    KK6QMS XML Subscriber QRZ Page

    How do you all log FSQ in log here on QRZ? No FSQ in the list. Thx

Share This Page