FLDIGI RIGMODE MACROS

Discussion in 'Amateur Radio Software' started by KI5LIK, May 2, 2021 at 12:57 PM.

ad: L-HROutlet
ad: l-rl
ad: Left-3
ad: Left-2
ad: Subscribe
ad: L-MFJ
ad: abrind-2
  1. KI5LIK

    KI5LIK Ham Member QRZ Page

    Running FLDIGI 4.1.18 on Win10 to an ICOM 7300.
    I was wanting to streamline mode changes when going from something like PSK31 to RTTY.

    I have this macro "<MODEM:BPSK31><RIGMODE:USB-D" that will setup both FLDIGI and the IC7300 to correct modem and mode and I am off to the races in PSK.

    I have tried this macro "<MODEM:RTTY><RIGMODE:RTTY" to make a quick hop to RTTY mode of operation.

    Problem:
    1. THE <MODEM:RTTY> macro command works as expected and FLDIGI will switch to the correct RTTY modem BUT IC-7300 does not make the RIGMODE change to "RTTY"
    (I have tried the "RIGMODE:RTTY" command alone in a macro and cant get it to work. "RIGMODE:USB-D" does work on the IC7300).

    Is there something I am missing here? Has anyone else tried this macro command?
    Thank in advance for anyone who can help me correct this problem.

    KI5LIK diddle/diddle....
     
  2. KI5ONL

    KI5ONL Platinum Subscriber Platinum Subscriber QRZ Page

Share This Page