For Sale Estate Items

Discussion in 'Ham Radio Gear For Sale' started by K7JOE, Apr 17, 2017.

ad: L-HROutlet
ad: l-rl
ad: Subscribe
ad: L-rfparts
ad: l-assoc
ad: l-gcopper
  1. K7JOE

    K7JOE Ham Member QRZ Page

    radio shack htx-10. 10M all mode in the box. With all original accessories. Looks very good. Works FB. $125

    Comtronix FM-80. 10M fm radio. 2 pieces. One works ok, the other is intermittent vco lock up. Probably just a dirty contact or cap. $80 for both.

    Boomer HF amp. Preamp. Low/mad/hi power . Uses 2x Motorola MRF-455. Works. I get 140w max output Used with above 10M radios. Can work down to 40M with clean signal. Sensing RF t/r relay $75

    Gray 150: this is an HF and 6M amp . Works 20-55 MHz. I get 135 watts out on 10 meters and about 80 out on 6 meters. Uses 2 x Motorola MrF-492 transistors. With preamp and SSB delay. Sensing TR relay. $75

    Icom AT-100 auto tuner. Matches icom 730/740/751/745 series HF radios. Works fine and can be used in manual band switching mode with any HF radio. Ok shape. Runs on 120V or 12V. 4 antenna ports. Some scuffs but works ok for its age. $150

    MFJ-422 keyer and Bencher BY1 combo. Nice keyer paddles combo. Works with modern or boat anchor gear. $99

    Collins MM-1 hand mic with PJ068 plug. Label fell off. Element checks ok. Nice item. $99

    Icom FL-100 CW 500 HZ filter. These are popular to use with Icom 706 on the digital modes. Works with many Icom radios like 746/756 etc etc. $60

    Astatic desk mic. Wired for 8-pin Icom such as ic-7300, 7200, etc. Condenser element. No preamp. $40

    All items please add $9.99 for shipping.
    I'm good on QRZ and PayPal is OK.
    IMG_9244.JPG
     
  2. K7JOE

    K7JOE Ham Member QRZ Page

    More photos. Apparently some didn't upload.

    IMG_9275.jpg
     
  3. K7JOE

    K7JOE Ham Member QRZ Page

    AT-100 is sold. Pending payment.
     
  4. K7JOE

    K7JOE Ham Member QRZ Page

    [



    Got the name wrong on the following. Same amp and specs and notes, just read the list incorrectly:

    Dynamo Gold HF amp. Preamp. Low/mad/hi power . Uses 2x Motorola MRF-455. Works. I get 140w max output Used with above 10M radios. Can work down to 40M with clean signal. Sensing RF t/r relay $75

    All items please add $9.99 for shipping.
    I'm good on QRZ and PayPal is OK.

    Thanks. - will try for more photos too.
     
  5. K7JOE

    K7JOE Ham Member QRZ Page

  6. K7JOE

    K7JOE Ham Member QRZ Page

    Icom SM-5 works with most icom HF radios. $60


    image.jpg image.jpg image.jpg
     
  7. K7JOE

    K7JOE Ham Member QRZ Page

    MFJ HF 2KW cross-needle meter is sold.

    Still have the following (estate items, i've tested what I can but priced accordingly as-is etc):

    Collins MM-1 hand mic($99)
    Collins 180-L3 auto Tuner, nice big vacuum variable capacitor and silver-tape inductor inside ($79)
    Icom SM-5 condenser desk microphone 8 pin. ($60)
    Icom FL-100 cw/digi filter - plug in type fits many Icom HF rigs ($60)
    HF/6M amp Grey 150 ($75) Works good with the HTX-10 MRF-492 x 2 transistors, preamp 140W out +
    HF amp Dynamo Gold ($75) Also works good with HTX-10 MRF-455 x 2 transistors, preamp 140W out +
    Welz SP250 HF /6M SWR and watt meter in 3 ranges (up to 2KW). ( $60)
    Astatic desk Mic, wired for Icom 8-pin radios, condenser element ($40)
    Radio Shack HTX-10 HF (10 meter) radio, light use, in the box ($125)
    Yaesu FC-757AT auto antenna tuner/switch/ SWR meter. With i/f cable. some surface scratches. good tuner $100
    Bencher BY1 cw paddle and attached MFJ cw Keyer. great for boat anchors and new rigs alike $99

    All items please add $9.99 which allows us to split shipping cost.
     
    Last edited: Apr 21, 2017 at 4:29 PM
  8. W4JRV

    W4JRV XML Subscriber QRZ Page

    what do you want for the mfj 915 SWR Meter
     
  9. K7JOE

    K7JOE Ham Member QRZ Page

    Uh.. it's sold. Thanks.
     
  10. QRZ
    Important Rules
    Have you read our Swapmeet Safety Rules?

    This forum enforces a set of buying/selling safety rules for the benefit of all users. Make sure that you're familiar with the rules before posting or replying in this area. Our moderators review every post in this forum and will flag or delete those that do not conform.

     

Share This Page