ad: portazero-1

Dud multi section caps

Discussion in '"Boat Anchor" & Classic Equipment' started by W5INC, Aug 10, 2019.

ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: Left-2
ad: Left-3
ad: MessiPaoloni-1
ad: Subscribe
ad: K5AB-Elect-1
  1. W5INC

    W5INC XML Subscriber QRZ Page

    Looking for some dud multi section capacitors for the project now on the bench. I am going with new electrolytic caps in the piece but the old multi section cap's bottom phenolic mounting tab got broken off 2 of the old caps. So the caps are now blowing in the wind so to speak. I am looking for a cap that is 1 5/8" in diameter and the mounting screw holes in the bottom phenolic piece is 1 3/4" center to center. The other dud cap I am looking for is 15/16" in diameter and the mounting screw holes are 1 1/2" center to center. I don't need good caps just non working pieces as there is plenty of room to mount the new electrolytic caps, via silicone right to the bottom of the old dud caps, or stuff them into the old pieces once again. Any BA person have a few of these dud caps laying around that they don't need anymore? TIA. :)
     

Share This Page