Control Head Ext. Cable and Mic Ext. Cable for FTM-400 and FTM-100DR and 8 pin radios also Icom

Discussion in 'Ham Made Gear' started by N2RGA, Oct 10, 2018.

ad: L-HROutlet
ad: l-rl
ad: Left-3
ad: Left-2
ad: l-assoc
ad: L-MFJ
ad: Subscribe
  1. N2RGA

    N2RGA Ham Member QRZ Page

    We Now ship to Canada! And carry some for Icom Radios

    Control Head Extension Cable and Microphone Extension Cable for FTM-400 and FTM-100DR

    Includes:
    1. Head Extension cable 10 Foot and 20 Foot Versions Available with 4pin / 4 Wire Connectors For the FTM-400, FTM-100 Radios CT-162 equivalent But Longer
    2. Microphone Extension Cable 10 Foot and 15 Foot Versions avalable with 6 Pin / 6 Wire Connectors and with Double Female Connector.
    Straight through Pin 1 to Pin 1, Pin 2 to Pin 2, Pin 3 to Pin 3 and so on.

    You can now move your YAESU FTM-100DR, FTM-400DR, FTM-400XDR In the trunk or under any seat.

    Each Cable is tested by me on my FTM-400. I even use a set in the car
    These Cables are USA Made by Me, and USA Sold by me.

    Beware of cheaply made cables.

    To Buy visit My Website https://www.n2rga.com/

    20 Foot Control Head Ext. and 15 Foot Mic Ext. $24.95

    10 Foot Control Head Ext. and 10 Foot Mic Ext. $19.95



    -----------------------------------------------------------------

    Yaesu FTM-400 FTM-100 remote head separation cable CT-162 equivalent USA Made

    Using the separation cable, allows you to mount the radio’s front panel in a remote location in the car.
    Compatible with mobile station radios: YAESU FT-100DR, FTM-400DR, FTM-400xdr
    Each Cable is tested by me on my FTM-400xdr
    These Cables are USA Made by Me, and USA Sold by me and tested on my Radio.

    Comes in 10 Foot $12.50 and 20 Foot $19.95 Lengths. Also Custom Lengths Available

    To Purchase go to https://www.n2rga.com/

    ------------------------------------------------------------------

    Microphone Extension 6 Pin Modular for any Radio with A 6 Pin Rj12, RJ11

    The cable is for any radio that uses the 6 pin modular RJ-12 RJ-11 plug / jack for the Microphone

    Straight through:
    Pin 1 to Pin 1
    Pin 2 to Pin 2
    Pin 3 to Pin 3
    Pin 1 to Pin 4
    Pin 5 to Pin 5
    Pin 6 to Pin 6

    These Cables are Professionally Made by Me, and USA Sold by me and tested on my Radio.
    Beware of cheaply made cables.

    List of Radios it will work with Plus others with a 6 pin Modular plug

    Kenwood:
    TK-6110K, TK-6110K2, TK-630, TK-705, TK-705D, TK-706, TK-706D, TK-709, TK-7102, TK-7108, TK-715, TK-7150, TK-7160, TK-7180, TK-730, TK-740,
    TK-750, TK-752, TK-759, TK-760, TK-760G, TK-762, TK-762G, TK-763, TK-763G, TK-768, TK-768G, TK-780, TK-780G, TK-785, TK-805, TK-805D, TK-806,
    TK-806D, TK-809, TK-8102, TK-8108, TK-815, TK-8150, TK-8160, TK-8180, TK-830, TK-840, TK-841, TK-850, TK-852, TK-859, TK-860, TK-860G, TK-862,
    TK-862G, TK-863, TK-863G, TK-868, TK-868G, TK-880, TK-880G, TK-885, TK-930, TK-940, TK-941, TK-980, TK-981, TKR-730, TKR-740, TKR-750, TKR-830,
    TKR-850, TM-261A, TM-271A, TM-461A, TM-471A.

    Yaesu:
    FT-7800R, FT-7800E, FT-7800, FT-8800R, FT-8800E, FT-8800, FT-8900R, FT-8900E, FT-8900, FT-2800M, FT-1802M, FT-1900R, FT-1900E, FT-1900, FT-2900R,
    FT-2900E, FT-2900, FTM-100D, FTM-100DR, FTM-350R, FTM-400DR.

    Comes in 10 foot $13.95 and 20 foot $19.95 Lengths

    To Purchase go to https://www.n2rga.com/

    -------------------------------------------------------------------

    FTM-100DR Control Head Replacement Cable 5" Long to Attach Control Head to Transceiver Body

    Made by me and Tested With my FTM-400DR (same connections as FTM-100)

    $8.50

    To Purchase go to https://www.n2rga.com


    ------------------------------------------------------------------

    10 and 15 Foot Microphone Ext. Cable Icom OPC-440 Equivalent for ID-5100A, ID-4100A, IC-2720H, ID-4100A, ID-1, ID-800H, ID-880H, IC-2725E, IC-2730A, IC-2820H, IC-208H, IC-V8000, IC-2100H, IC-2200H, IC-2800H, IC-2710H, IC-207H

    $13.95 and $19.95


    ------------------------------------------------------------------


    10 and 20 Foot – ICOM Control Head Extension 6 Pin OPC-1156 Equivalent for ID-5100A/E, ID-4100A, IC-2720H, IC-2725E, IC-2730A/E, IC-R2500


    $19.95 and $13.95


    ------------------------------------------------------------------

    10 Foot_Control_Head_Ext_and_10_Foot_Mic_Ext_Cable_N2RGA.png 10_Foot_Control_Head_Ext_Cable_N2RGA.png 10_Foot_Mic_Ext_Cable_N2RGA.png 15_Foot_Mic_Ext_Cable_N2RGA.png 20_Foot_Control_Head_and_15_foot_Mic_Ext_N2RGA.png 20_Foot_Control_Head_Ext_Cable_N2RGA.png Control_Head_Cable_N2RGA.jpg 4Pin.png 6Pins.png 5_Inch_FTM-100dr_Replacement_Control_head_Cable.png
     
  2. KA9MOT

    KA9MOT Ham Member QRZ Page

    I have a set of these for my FTM100DR and a set for my FTM400XDR. well built cables. They hide well even with the grey color.
     
    N2RGA likes this.

Share This Page