Boat Anchor sked 29.010kc AM

Discussion in 'SKED - QSO Scheduling' started by W0TDH, Apr 27, 2008.

Thread Status:
Not open for further replies.
ad: L-HROutlet
ad: l-rl
ad: Subscribe
ad: L-MFJ
ad: Left-3
ad: Left-2
  1. W0LPQ

    W0LPQ Ham Member QRZ Page

    Could have been W6OAL in CO on .160 .. chatted with him yesterday .. always S9+ here..

    10 was pretty dead. Heard a W6 today ... lasted maybe 7-8 minutes then he was gone.
  2. WB1EAD

    WB1EAD Ham Member QRZ Page


    Evening Tom et all..Just got in from in-laws..did stop for a few minutes to work N4BNM on 28.470 earlier today..beam on Europe..went to 28.505 later
    and worked W4KVW..between 1300 & 1600 utc..listened on 29mhz. but again
    nada..glad u worked Andy..will definetly give a listen tommorow around same
    time..if anyone hears me..yell..i'll swing the array south..
    that's 5/26 1300 to 1600 utc 29.000 to up around 29.100

    73 de DAVE(Tom i'll check the e-mail later)
  3. W0TDH

    W0TDH Ham Member QRZ Page

    Monitoring 29.000kc AM

    GM Dave,

    Glad to hear you made a few AM QSO's yda.

    I am on now for a few hours. Using the AF-67 es 75A-2 this morning.

    The AF-67 drifts, so you may have to follow me up the Band some :))

    I am grinding xtals for 29.000 es 29.010kc.


  4. W0TDH

    W0TDH Ham Member QRZ Page

    Tnx for e mails this morning Dave

    Sorry prop not good your way. I did copy some of your transmissions.

    I did have solid QSO with Bob - K0RDF in Mo. He was using a Ranger. 40wts

    He also gave me a good audio report on the AF-67 as you did.

    I have to throw four switches each time, .... not exactly Brk In :))

    73, Tom
  5. W2VW

    W2VW Ham Member QRZ Page

    Unfortunately we lost KH6CC this April.
  6. WB1EAD

    WB1EAD Ham Member QRZ Page

    Still hanging on 10am..

    Hello all..still checking on 10mtrs every Tues. and Wed..AM 29.000..since i've checked in here last 12 Q's there all AM..
    Tnx Dave W2VW for info about Jack..sorry to hear that..1st time i worked him was 4/22/02 at 2010utc 29mhz AM..he had a FB station..must've worked at least half the guys you listed..miss Moe..wonder who got the equipment after?.
    For what it's worth will be on almost every Tues & Wed..29.000 AM..between 1400 and 1600 utc..turn your beams to New England..i'll be there
    Tom as always tnx for the e-mails..if the band is open i'll ticky tap the news to you..
    73 de DAVE
  7. W0TDH

    W0TDH Ham Member QRZ Page

    Nice opening last two days

    Hello Dave,

    Great to chat with you today on 29.020kc

    Signals were good. Glad you like the way the AF-67 sounds. I like the lil rig.
    About 12 wts to the amp es 100wts to beam. Using 75A-2 for rcvr.

    Sending Andy - WAØGAG those xtals tmrw. I have started grinding a few for me as well. The VFO on the AF-67 drifts a bit. Sent you an e mail about
    a possible vendor for FT-243 xtals. AF4K - Brian. I sent him an e mail to see if he is still selling them. Hope so, as I will never make a career grinding them :)

    Spoke with W2VW es WØRHO today. Hrd K2WH but nc.
    N1YNI, KE4EG es W6UH yda.

    Not bad for NO SPOTS :)


  8. WB1EAD

    WB1EAD Ham Member QRZ Page

    It's's alive..( 10 am )

    Hey Tom and all..nice to work you too Tom..had about 15mins to sneak in there and worked out good..the AF67 sounds way you would get a bad have become Andy's xtal grinder!! i'm sure he appreciates that..quite a lost art to "grind ur own"..the trick of the #2 pencil i will admit is totally new to me..guess it works..
    Will be around as usual this coming Tues & Wed..29.000 AM..for those who have not checked out the top end of 10mtrs..things are happening there's just a brief rundown of callsigns either worked or heard the last few days..
    73 de DAVE
    W2VW likes this.
Thread Status:
Not open for further replies.

Share This Page