baofeng firmware: hn5rv01 stock img file

Discussion in 'Amateur Radio Software' started by KN6KKW, Sep 26, 2020.

ad: L-HROutlet
ad: l-rl
ad: L-MFJ
ad: Left-2
ad: abrind-2
ad: Left-3
ad: Subscribe
  1. KN6KKW

    KN6KKW Ham Member QRZ Page

    Does anyone have a stock baofeng bf-f8hp with firmware version hn5rv01? I programmed my radio using chirp and now I can't hear anything unless i am in menu or holding down moni.

    I realize now that I should have done an initial backup of my baofeng settings but I didn't unfortunately.

    If anyone can help I would really appreciate it. I just got my license and really want to make a few contacts. Thanks.
     
    KA9JLM likes this.
  2. N3AJ

    N3AJ Ham Member QRZ Page

  3. ND5Y

    ND5Y Ham Member QRZ Page

    Turn off receive CTCSS or DCS and see if that helps.
     
  4. KN6KKW

    KN6KKW Ham Member QRZ Page

    Unfortunately that miklor link doesn't have the firmware hn5rv01
    Baofeng support is obviously no help.
     
  5. KA9JLM

    KA9JLM Ham Member QRZ Page

    Some (Many) of those radios have the Firmware in ROM.

    It is burn once, And can not be updated.

    That is what you get when you cheap out buying a radio. o_O

    Are you sure you need the Firmware ? And not a Programming image ?
     
  6. KA9JLM

    KA9JLM Ham Member QRZ Page

    You should be able to , Remove the battery, Then wait a while.

    Reinsert the battery and do menu 40, 1 (Reset All)

    Power it OFF then back ON, Then read from radio using Chirp, Save that as a template. Then you can edit that image file and save it back to the radio.

    I find it best, Not to mess with Memory location 0 (Zero). For some reason that can mess things up. Start at the second memory location (1) in Chirp.


    upload_2020-9-29_18-51-42.png

    Good Luck.
     
    Last edited: Sep 30, 2020

Share This Page

ad: vanity