My 7100 keeps shutting down and rebooting when approaching 50% power or more. I read another thread that he found his power supply to be...
I have bent my brain around this many different ways but can't seem to find the secret combo to get MMTTY to work my 7100 for RTTY. Here is the...
Earlier this year this radio would not transmit above 50% power on any band. After some troubleshooting, we determined that the MFJ power supply...
Hi All, In the connection setup for HRD with IC-7100, I see two profiles - IC-7100 and IC-7100V2. I am wondering what the differences are and...
I used the AM mode on LSB to pre tune my MFJ manual tuner before checking full power on RTTY (per advanced manual). My AM transmit function has...
I'm trying to get my Icom IC-7100 connected to either Mac or Windows for the first time. I'm pretty technical and I am called upon by may others...
I have an issue with a new IC-7100 (purchased on 12/28/2019). The issue is that when transmitting on AM, FM, or DV at more than 50% power on HF...
Just completed installing a new Icom IC-7100 all band all mode transceiver in our 2012 Tacoma 4X4, which I will do a show and tell on in a...
I have bought an used IC7100, not modified (no SSB power mod), latest firmware installed (Release E5 from 2016). I was testing the radio for the...
I am on a journey trying to integrate a ICOM IC-7100 into a 07 Audi A4 (8E Chassis). There is not very much real-estate in the driver area to...
Greetings: I have a similar issue as the reported IC-7300 Clock Battery Failure. I have have had my IC-7100 for over three years. I mainly use...
My IC-7100 still has the original factory-installed sheet of flexible plastic film stuck to the display. I left it on because the screen itself...
Jarrad VK3BL covers the essential features you should look for in a new radio in 2018, with advice specifically targeted to those new to the...
Dear Friends, A few people have asked about the IC-7100 sitting on my shack desk, so I've done a mini review covering why I bought the rig and...
Hi all Any help would be appreciated. the following error is received when trying to transmit on D-Star mobile " Error, RPT 1 invalid" How do I...
IC-7100 I mess up somehow. when push the DR button I get the "no repeater" found" there is now no way to do anything with dstar. How do I get back...
I made this video tutorial on adding IF output for a panadapter on the Icom IC-7100 or any other transceiver. It is in Portuguese language, but I...
Hi! (Sorry if this is posted in the wrong forum) My IC-7100 stopped transmitting, or so I thought until I actually tried talking through the...