ad: QuirkyQRP-1

EXTREME ham radio SHF 10ghz microwave rover

Discussion in 'Amateur Radio News' started by KJ4YZI, Feb 14, 2017.

ad: L-HROutlet
ad: l-rl
ad: abrind-2
ad: Left-3
ad: L-MFJ
ad: Radclub22-2
ad: Left-2
  1. KJ4YZI

    KJ4YZI Ham Member QRZ Page


    Activity exists above 1.2ghz . This is a mobile rover, for contesting on bands up at 10 gigahertz.
    upload_2017-2-13_22-14-20.png
     
    AD5KO, K3RW, KA0HCP and 3 others like this.
  2. IZ5TEP

    IZ5TEP Ham Member QRZ Page

    very nice
    73
    iz5tep
     
  3. KA0HCP

    KA0HCP XML Subscriber QRZ Page

    Classy!
     
  4. KE4NZG

    KE4NZG Ham Member QRZ Page

    Excellent Microwave Effort..73 from Jim KE4NZG.
     
  5. K3RW

    K3RW Ham Member QRZ Page

    What would I use to operate up this high?

    I've seen some SDR receivers that might go that high, and the DEMI transverters ($$$$), but haven't seen many other options.

    When the 5/10ghz geostationary satellite goes I will hopefully be ready!
     
  6. KD2GIY

    KD2GIY Ham Member QRZ Page

    very gully
     
  7. NEW1

    NEW1 QRZ Member

     
  8. NEW1

    NEW1 QRZ Member

    Correct me if I am wrong please, isn't the X-Band used by law enforcement for speed detection in the 10 gig range?
     
  9. W0PV

    W0PV Ham Member QRZ Page

    The IEEE defines the X-band as spanning 8-12 GHz. The allocation of that assigned to Amateur Radio Service is the segment 10-10.5 GHz. Police radars using the X-band are just above that at 10.525 GHz. Consumer automobile radar detectors have been converted to be used as receivers by amateurs (see Feb 1991 73 magazine).

    The 10 GHz segment has long been a very popular amateur microwave band. The first geo-synchronous orbiting amateur satellite, hopefully soon to be launched, is being designed to use 10 GHz as the down link (5 GHz up link).
     
    Last edited: Feb 23, 2017
  10. W6RZ

    W6RZ Premium Subscriber QRZ Page

  11. YD1MCD

    YD1MCD Ham Member QRZ Page

  12. AI3V

    AI3V Ham Member QRZ Page

    Well you could build a GPS locked transverter.

    Probably cost you 2 or even 3 hundred dollars.

    My 5760 MHz 10watt 2db nf homebrew transverter cost less than $200, course I only have a quartz txco local osc....

    Rege
     
  13. AI3V

    AI3V Ham Member QRZ Page

    Yes. It is also used for intrusion alerts, and door opening at places like supermarkets.

    My 10ghz gunn oscillator wideband FM units started out opening doors before I tuned them to 10475mhz

    I also modified them from 1/1000 watt to 1/100 watt transmitters.

    Using home made horns and some 2' diameter light reflectors for antennas.

    So far my best DX is 40 miles. Full scale s-meter, full quieting, full duplex voice.

    Rege
     
  14. K3RW

    K3RW Ham Member QRZ Page

    Somewhere on the 'net I saw a page about a guy who took apart an old microwave and used it to build a microwave transceiver. I haven't the skills to probably do it, but I do have a microwave sitting on the floor of the garage.
     
  15. K3RW

    K3RW Ham Member QRZ Page

    Where do you find a plan for that? What was the input (28mhz?)?

    I'm interested in a lot of stuff but reliant on kits for the more intriguing things
     

Share This Page

ad: Sussex-1