I really could use some help here. I have a FT-857D that is connected up to a Rigblaster Pro and I am using a Dell Inspiron 1200 running Windows XP Home. My software for SSB, RTTY, PSK31 and CW is Ham Radio Deluxe and I use the DM780 program with it. Here is what is happening. All works fine on SSB, RTTY and PSK31. It is CW that I am having a problem with. When I tyoe in the window to transmit and click on the SEND button, I see the Rigblaster CW light go on and off with the characters that I typed. But the rig transmits random code and not what I typed. If I use MCW it works fine. I feel that it is the computer that is connected to the CAT jack on the rig that is causing the problem but not sure. The Rigblaster is controlled by a USB COM port and the rig is controlled by a USB COM port. The Rigblaster is connected to the rig correctly and to the computer correctly. Both DTR and RTS are selected in the DM780 program options for PTT along with COM Port control with the correct COM Port selected. I am at a loss as to why random characters are being sent by the rig. I have went through all the Yeasu setup for CW and can't find anything there that would cause the problem. I have the correct Yeasu CAT interface cable. All cabling is correct to the best of my knowledge.
HELP HELP please!!!!!!!