Quote Originally Posted by WA4FFF View Post
My oil cap. is a SPRAGUE 200 2000VDC, 8.5''x6.75'x4'', has ??model# 286P Y16362

I'm inclined to agree with you all, It most likely is 20 MFD 2000VDC

Thanks all: Bill WA4FFF

They are still very useable.

If I was going to put them in service I would bring them up slow while watching the Voltage that leaks to the Case.

The PCB's are not a problem unless it blows, Caused normally from the oil getting to hot.

If you have much leakage to the Outer Metal case then the Oil may be contaminated, or they are bad.

PCB's are too over rated and are not a real problem, unless you are paranoid. Just don't smell the smoke and dispose of them properly.