Callsign
ad: giga-rw
Results 1 to 3 of 3

Thread: Sena SR10 Yaesu Interface

ad: l-AmericanRadio
ad: l-assoc
ad: l-innov
ad: l-hrd-1
ad: l-ezhang
ad: l-gcopper
ad: l-Waters
ad: l-BCInc
  1. 05-03-2012, 05:02 AM #1
    K6IUZ
    K6IUZ is offline Ham Member
    Join Date
    Mar 2006
    Posts
    7

    Default Sena SR10 Yaesu Interface

    Was wondering if anyone has successfully interfaced a Sena SR-10 to a Yaesu FT-857...
    Tom
    K6IUZ
  2. 05-03-2012, 02:06 PM #2
    K0BG's Avatar
    K0BG
    K0BG is online now Premium Subscriber
    Join Date
    May 2001
    Location
    Roswell, NM
    Posts
    2,036

    Default

    I don't care which Bluetooth device you choose, there are problems with all of them with respect to their use on two way radios.

    The biggest is the delay from Rx to Tx, and back. As the distance between the devices increases, so does the delay. My RPF unit is a good example. The turnaround time is about 1 second, and extends to well over 5 seconds when 10 feet away.

    The audio is delayed a bit, and in some cases hearing the radio in one ear, and the Bluetooth audio in the other can be very distracting.

    The idea of wireless headsets is intriguing, but not yet practical for two way radio.
    Alan Applegate, KØBG
    http://www.k0bg.com
  3. 05-04-2012, 03:56 AM #3
    K6IUZ
    K6IUZ is offline Ham Member
    Join Date
    Mar 2006
    Posts
    7

    Default

    Alan...thanks for your comments...didn't think the delay would be an issue...
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules