|
|
-
 Originally Posted by KC7YRA
Only 18 days until I wake up at butt 30 and drive hundreds of miles to the airport, only to board a plane bound for Dayton.
http://www.hamvention.org/
Tick Tock Tick Tock
Using that balloon photo as a reference, see if you can spot Hara from the plane as you approach. During one of the years I didn't attend, my stepson worked as a theater manager in one of the Dayton suburbs. When my wife and I went to the movies, not only could i count antennas on the cars we passed, I could stand outside the theater and see Hara (and Hamvention) in the distance and wish I was there instead of a chick flick. 
Steve
If you have to worry about the cost of HF e-mail, you can't afford the boat.
CW: The mode that accomplishes the most with the least circuitry, the least spectrum, and the least power.
What hath God wrought?
He hath wrought that pounding brass still kicks .- ... ...
-
I'll certainly try to look for Hara. I will even try to get photos for the documentation thread that I will post.
That is, unless I end up vomiting on the plane. I have not flown much at all. Only a few times. I can stand on the edge of a cliff anf look down several thousands feet while dangling from a rope, but I still can't get past the idea of flying.
For the love of radio LOL.
Brad
"Life is just like ridin' broncs, its a battle". Chris ledoux
Long live Steamboat
-
I just got the ARRL Data from HQ and they have MOVED the Kit building area because now they will have a big DIY stage in the center rear of the ARRL EXPO. This has alotta seats and will feature probably continuous programs on doing this and that. They will publish a schedule shortly of the subjects. So I am not sure if there will be alot of tables and chairs now around the kit building area. That will be on the FAR RIGHT of the ARRL EXPO, which I believe will be the WEST end. (GOTTA COMPASS???). The DIY stage will be in the far SOUTH end of the EXPO. The Stage will probably be about 50 ft from the kit building booth as the EXPO is a large area. So we can still meet there, but just wanted to notify everyone that it is now located in a different place.
-
Originally Posted by WA6MHZ
That is what is holding me up. I don't know WHICH Hallicrafters LOGO to use.
I like this one.
73,
Sue
AF6LJ
You cannot rule an educated population.
-
Originally Posted by WA6MHZ
I just got the ARRL Data from HQ and they have MOVED the Kit building area because now they will have a big DIY stage in the center rear of the ARRL EXPO. This has alotta seats and will feature probably continuous programs on doing this and that. They will publish a schedule shortly of the subjects. So I am not sure if there will be alot of tables and chairs now around the kit building area. That will be on the FAR RIGHT of the ARRL EXPO, which I believe will be the WEST end. (GOTTA COMPASS???). The DIY stage will be in the far SOUTH end of the EXPO. The Stage will probably be about 50 ft from the kit building booth as the EXPO is a large area. So we can still meet there, but just wanted to notify everyone that it is now located in a different place.
I see you're scheduled in Room 3 from 9:15-10:15, Sunday morning. Everybody else's forum lists full names and call signs. But, as Madonna is Madonna, Sting is Sting and Cher is Cher, you're just Pat.
I suggest all zedizens cram the forum.
Last edited by N8CPA; 04-29-2012 at 03:29 PM.
Steve
If you have to worry about the cost of HF e-mail, you can't afford the boat.
CW: The mode that accomplishes the most with the least circuitry, the least spectrum, and the least power.
What hath God wrought?
He hath wrought that pounding brass still kicks .- ... ...
-
My name is NOT IMPORTANT! Only that they got my CALL right. Same with DX. The DX doesn't care about my name. All he want is my CALLSIGN for the logbook.
As history passes, I will LONG be forgotten, but my CALLSIGN will live on (providing someone gets if for a Club Call!)
-
Originally Posted by W4PG
OK . . . . ARRL Expo area around 11:30 to noon or so on Saturday for eyeball QSOs.
..............Bob
See you there guys - unless Vegas gobbles me up prior to Dayton
VK4NM - ANDREW
-
They just have my talk listed as "RADIO RESTORATION". Guess they figure no one will show up anyway Sunday morning, so why bother. Everyone will be at CHURCH Sunday morning instead of the Hamvention! I gotta find an EARLY EARLY Mass, starting at about 6AM somewhere in Dayton so I can get to the Arena on time! I remember one time I tried to give a Sunday program at the ARRL Southwestern Division convention. ONLY SUE showed up!
-
Originally Posted by WA6MHZ
They just have my talk listed as "RADIO RESTORATION". Guess they figure no one will show up anyway Sunday morning, so why bother. Everyone will be at CHURCH Sunday morning instead of the Hamvention! I gotta find an EARLY EARLY Mass, starting at about 6AM somewhere in Dayton so I can get to the Arena on time! I remember one time I tried to give a Sunday program at the ARRL Southwestern Division convention. ONLY SUE showed up!
Not everyone.
ANNOUNCING the 19th Annual WASHFest 2014, The South Hills Hamfest, Sunday, 23 February 2014.
Located at the Castle Shannon VFD Memorial Hall, State Route 88 (Library Road) at Grove Road, Castle Shannon PA., ~ 10 minutes from downtown Pittsburgh.
[From Downtown, Take the Liberty Bridge across the Mon, go through the Liberty Tunnel, then turn onto SR 51 South to SR 88]
Talk-in on N3SH/R 146.955 - and N3FB/R 443.650 + (131.8 PL).
See you there!
-
Originally Posted by N8CPA
I suggest all zedizens cram the forum.
Suggestion accepted. It will be the best party of the Hamvention other than the hospitality suites.
Get there early for a good seat.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
