Callsign
ad: cq2k-1
Results 1 to 3 of 3

Thread: Homebrew 3-1000Z amplifier

ad: L-HROutlet
ad: l-assoc
ad: l-sarc
ad: l-WarrenG
ad: l-rl
ad: l-innov
ad: l-Waters
ad: l-tentec
ad: l-gcopper
  1. #1

    Default Homebrew 3-1000Z amplifier

    Hi, all concerned:

    As much as I'd like to, I'm simply not going to get around to completing the re-assembly of this homebrew 3-1000Z g-g amplifier, so it's up for sale: part-out or, preferably, as a whole.

    Individual prices include well-packed FedEx ground insured shipping to your conus door. Pick-up and package shipping prices are up for discussion.

    Amp deck:
    1. 3-1000Z, recently getterized to dull red and tested to *full* r-f output: $175
    2. HR-8 plate cap for 3-1000Z, 4-1000, 833A: $20
    3. B&W *852* tank, 10-80M, excellent condition, (with extra contact for 160M position, requires additional inductor): $150
    4. SK-510 socket for 3-1000Z: $55
    5. SK506 chimney for 3-1000Z: $75
    6. 7.5V/22.5A filament transformer for 3-1000Z: $65
    7. UCS-300 vac variable: $135
    8. Turns-count drive for vac-var: $55
    9. 2000pF loading variable: $40
    10. Simpson 3" 500mA grid-current meter: $30
    11. Simpson 3" 1A plate-current meter: $40
    12. 1.5A plate r-f choke: $35
    13. 30A filament choke: $45
    14. Dayton 4C440 blower: $50
    15. Bandswitched -parallel-tuned input: $50
    16. Ceramic insulation open-frame 115vac amp bypass relay: $15
    All of the above amp parts, most already on a 13"x17"x4" chassis/enclosure: offer >$650

    Power supply:
    1. Drake L-4/L-7 plate transformer
    2. Voltage-doubler rectifier stack
    3. Capacitor stack with equalizers
    4. Power/control/plate-step-start relays and resistors
    All of the above power-supply parts, on a 13"x17"x3" chassis/enclosure, with power and HV cables: offer >$300

    Spares, descriptions same as above:
    1. 3-1000Z: $175
    2. B&W *852* tank: $150
    3. SK506 chimney: $75
    4. Filament xfmr: $65
    5. 2000pF loading variable: $40
    6. 2 HR-8 plate caps: $20
    All of the above spares: offer >$375

    All of the above: offer >$900

    Individual prices include well-packed FedEx ground insured shipping to your conus door. Pick-up and package shipping prices are up for discussion.

    Thanks for reading.
    Brgds,
    Dave Windisch, W8FGX
    Cincinnati
    513-674-7202 any time
    Attached Thumbnails Attached Thumbnails PICT0039.JPG  

    This ad was posted by N3HE DAVID J WINDISCH, Cincinnati, OH 45212,
    N3HE joined QRZ on: 07-29-2001 IP: 24.209.30.75

    To inquire about this listing, please contact the seller directly as specified in the ad.

    If no email address or phone was given, click HERE to send N3HE a private message.

    QRZ assumes no responsibility for the accuracy of this listing.


  2. #2
    Join Date
    Dec 2002
    Location
    Tolga is SW of Cairns grid QH22
    Posts
    4

    Default

    Is this really true that this 3-1000Z kit is still subject to applications in the year 2010. If so I might be interested VK4TL

    As much as I'd like to, I'm simply not going to get around to completing the re-assembly of this homebrew 3-1000Z g-g amplifier, so it's up for sale: part-out or, preferably, as a whole.

    Individual prices include well-packed FedEx ground insured shipping to your conus door. Pick-up and package shipping prices are up for discussion.

    Amp deck:
    1. 3-1000Z, recently getterized to dull red and tested to *full* r-f output: $175
    2. HR-8 plate cap for 3-1000Z, 4-1000, 833A: $20
    3. B&W *852* tank, 10-80M, excellent condition, (with extra contact for 160M position, requires additional inductor): $150
    4. SK-510 socket for 3-1000Z: $55
    5. SK506 chimney for 3-1000Z: $75
    6. 7.5V/22.5A filament transformer for 3-1000Z: $65
    7. UCS-300 vac variable: $135
    8. Turns-count drive for vac-var: $55
    9. 2000pF loading variable: $40
    10. Simpson 3" 500mA grid-current meter: $30
    11. Simpson 3" 1A plate-current meter: $40
    12. 1.5A plate r-f choke: $35
    13. 30A filament choke: $45
    14. Dayton 4C440 blower: $50
    15. Bandswitched -parallel-tuned input: $50
    16. Ceramic insulation open-frame 115vac amp bypass relay: $15
    All of the above amp parts, most already on a 13"x17"x4" chassis/enclosure: offer >$650

    Power supply:
    1. Drake L-4/L-7 plate transformer
    2. Voltage-doubler rectifier stack
    3. Capacitor stack with equalizers
    4. Power/control/plate-step-start relays and resistors
    All of the above power-supply parts, on a 13"x17"x3" chassis/enclosure, with power and HV cables: offer >$300

    Spares, descriptions same as above:
    1. 3-1000Z: $175
    2. B&W *852* tank: $150
    3. SK506 chimney: $75
    4. Filament xfmr: $65
    5. 2000pF loading variable: $40
    6. 2 HR-8 plate caps: $20
    All of the above spares: offer >$375

    All of the above: offer >$900

    Individual prices include well-packed FedEx ground insured shipping to your conus door. Pick-up and package shipping prices are up for discussion.

    Thanks for reading.
    Brgds,
    Dave Windisch, W8FGX
    Cincinnati
    513-674-7202 any time[/QUOTE]
    John Roberts

    This ad was posted by VK4TL JOHN ROBERTS, TOLGA, QLD 4882, ,
    VK4TL joined QRZ on: 12-05-2002 IP: 110.174.242.205

    To inquire about this listing, please contact the seller directly as specified in the ad.

    If no email address or phone was given, click HERE to send VK4TL a private message.

    QRZ assumes no responsibility for the accuracy of this listing.


  3. #3

    Default SOLD AS PACKAGE, THANKS***

    SOLD AS PACKAGE, THANKS***

    This ad was posted by N3HE DAVID J WINDISCH, Cincinnati, OH 45212,
    N3HE joined QRZ on: 07-29-2001 IP: 24.209.30.75

    To inquire about this listing, please contact the seller directly as specified in the ad.

    If no email address or phone was given, click HERE to send N3HE a private message.

    QRZ assumes no responsibility for the accuracy of this listing.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •