ad: AC6LA-1

Need some help with the Hw 101 Realy replacment.....

Discussion in '"Boat Anchor" & Classic Equipment' started by KB4MNG, Apr 14, 2012.

Thread Status:
Not open for further replies.
  1. KB4MNG

    KB4MNG Ham Member

    I have been working on my friends HW 101 and got it working. The relay in the final section may be problematic. I wanted to order him a replacement to have on hand incase of a complete failure in the future. I've done some looking around and it seems to have come down to two but I cannot figure out which one I need and these may not work.

    http://search.digikey.com/us/en/products/MY4 DC12 (S)/Z186-ND/307704

    http://search.digikey.com/us/en/products/HC4D-H-AC115V/255-2773-ND/647817

    Do you mind looking at the two and telling me if one will work? I know he hw 101 requires a mounting screw but I think I maybe able to make it work with alternate mounting methods. The other realy seems to work. Should I order a back up for that one or is it usually problem free?

    Any help greatly appreciated!

    Thanks KB4MNG Brian:cool:
     
  2. KO6WB

    KO6WB Premium Subscriber

    Hi Brian, the realys you have picked will not work properly in a HW-101. The relays RL1 and RL2 are higher voltage DC relays. They have 300VDC going through them. There is a site that has them and they list for about $8.00 which isn't bad. Information here; http://www.ultrawebb.com/OHP/parts.pl?page=TP-HW100-101%20Parts.htm.
    Hope this helps
    73
    Gary
     
Thread Status:
Not open for further replies.

Share This Page