minipa200

Discussion in 'Homebrew and Kit Projects' started by BG6GLL, Sep 1, 2016.

Tags:
ad: L-HROutlet
ad: l-rl
ad: L-rfparts
ad: l-gcopper
ad: Subscribe
ad: l-assoc
  1. BG6GLL

    BG6GLL QRZ Member QRZ Page

  2. KC8MWG

    KC8MWG Ham Member QRZ Page

    Are you going to use a low-pass filter array with that?
     
  3. BG6GLL

    BG6GLL QRZ Member QRZ Page

  4. W7SHA

    W7SHA XML Subscriber QRZ Page

    Do you have a better picture of the completed board? I have one also and would like to see what resistors go where and if I have the capacitors in the correct places. Also where do the diodes go. And also what are the number of turns for the transformers.

    Thanks
    Ron
     
  5. BG6GLL

    BG6GLL QRZ Member QRZ Page

  6. W7SHA

    W7SHA XML Subscriber QRZ Page

    Thank you this did help but I need either a schematic or very high resolution picture from the top that would show the value of the chip resistors. A 5 megapixel picture would do I think. But a manual or schematic would be better. Or even a parts placement diagram. I have everything placed except the resistors. Any help would be greatly appreciated.

    Thank You
    Ron
     
  7. BG6GLL

    BG6GLL QRZ Member QRZ Page

    MiniPA200 test
    24V power supply
    Input power: 5w,
    Ft817 radio
    7.05MHZ, output power 210W, current 15A
    28MHZ, output power 150W, current 10A
    Efficiency is greater than 55%
    [​IMG]
     
  8. BG6GLL

    BG6GLL QRZ Member QRZ Page

  9. BG6GLL

    BG6GLL QRZ Member QRZ Page

    1KW 30MHZ LPF/SWR
     
  10. BG6GLL

    BG6GLL QRZ Member QRZ Page

    1KW 30MHZ LPF/SWR
     

Share This Page

ad: Tetsuo-1