ad: elecraft

SOLD Icom IC-9100 w/extras

Discussion in 'Ham Radio Gear For Sale' started by W7EDS, Oct 9, 2019.

ad: L-HROutlet
ad: l-rl
ad: Subscribe
ad: MessiPaoloni-1
ad: L-MFJ
ad: Left-2
ad: Left-3
  1. W7EDS

    W7EDS Ham Member QRZ Page

    I have for sale a new (10 months old) Icom IC-9100 Transceiver from a non-smoking environment. This radio is exceptional and comes with everything including extras listed below. I will ship this item with tracking and insurance for $1150.00 paid via Paypal (k5 e d s at earthlink dot net). I cover all shipping and fees!
    Also included

    - Heil ICM microphone

    - Custom dust cover

    - Original Boxes!

    Dorsey W7EDS

    The Icom IC-9100 is a versatile and expandable transceiver. It offers professional performance, out of the box on HF, 6 meters and 2 meters with 2 to 100 watts (2 to 30 for AM). The 440 MHz band is also built-in with 2 to 75 watts. The UX-9100 band unit can also be added at any time for 1200 MHz, 10 watt operation (shown above). The IC-9100 can simultaneously receive on two different bands and works as if there are two independent receivers in one radio. Each main and sub-receiver has a dedicated DSP unit providing flexible digital IF filters, AGC time constant, twin PBT, manual and auto notch filter, noise reduction, noise blanker, etc. The USB port can transfer modulation, received audio, RTTY demodulator and DV mode data. Satellite operation is not an after-thought on this transceiver. The satellite mode synchronizes the uplink (transmitting) and downlink (receiving) frequencies and shifts the frequency with the same tuning step. Twenty alphanumeric satellite memory channels store frequency, mode and tone settings. A built-in RTTY demodulator and decoder allows you to read a RTTY message instantly without an external PC or external decoder. A built-in automatic tuner covers the HF bands plus 6 meters. Other refinements include electronic keyer jack on the front panel, four CW memories, voice squelch control, band edge beep, built in voice synthesizer. The multi-function meter shows signal strength, output power, SWR, ALC and compression level. There are main and sub-receiver speaker outputs. This device requires 13.8 VDC at 24 Amps. 12.5 x 4.6 x 13.5 inches 24.3 lbs. (315x116x343mm 11kg). Includes HM-36 hand mic, OPC-1457 DC power cord, MB-123 handle, and Owner's Manua

    CIMG0918.JPG CIMG0917.JPG CIMG0916.JPG CIMG0915.JPG
     
  2. W4MTD

    W4MTD Ham Member QRZ Page

    Very interested ...I sent you a PM
     
  3. W7EDS

    W7EDS Ham Member QRZ Page

    Note: This Icom does not have the DSTAR board or the 1.2 Ghz board. They both can be added if desired.
     
  4. W7EDS

    W7EDS Ham Member QRZ Page

    Radio is sold!

    thanks Walt!
     
  5. QRZ
    Important Rules
    Have you read the Swapmeet Rules?

    This forum enforces a set of buying/selling rules for the benefit of all users. Make sure that you're familiar with the rules before posting or replying in this area. Got questons? Contact our moderation team here...

    All Sellers Must Be Verified As of July 1, 2019, only Verified Users are permitted to post in this forum.

     

Share This Page