FTDX 3000 and Winmor

Discussion in 'Rig Control, Propagation, Cluster, & Other Softwar' started by KJ3LR, Aug 19, 2018.

ad: L-HROutlet
ad: l-rl
ad: MessiPaoloni-1
ad: Left-3
ad: Subscribe
ad: Left-2
ad: L-MFJ
  1. KJ3LR

    KJ3LR Premium Subscriber QRZ Page

    Is anyone using the Yaesu 3000 for rms winlink? I've been having a hard time getting the radio to transmit within the program. There is no FT 3000 to select when setting up the software, so, I have read to use the FT 2000 setting.
    The software controls the radio, but it won't key the radio when I start a session. Any help greatly appreciated.
    Best regards,
    Lou - KJ3LR
     
  2. KJ3LR

    KJ3LR Premium Subscriber QRZ Page

    ^ actually, I meant the radio won't key up to establish a connection.
     
  3. KJ3LR

    KJ3LR Premium Subscriber QRZ Page

    For anyone interested, I managed to get the FTDX 3000 to key up and send and receive messages via RMS.
     
  4. VK3MDH

    VK3MDH Premium Subscriber QRZ Page

    Hi Lou,

    I would be very interested in your settings on the Ftdx3000 and in Winmor. Struggling to get it to connect. Any help appreciated.

    Cheers,

    Mark
     
  5. KJ3LR

    KJ3LR Premium Subscriber QRZ Page

    Hi Mark,

    This was sent to me by Jim, WQ2H....

    Here's of screen shot of what works for me with both the 991 and the 1200. Leaving the COM blank leaves the program to assign it's own, or you can assign one yourself. Data (on the radio) also has to be set on USB, not MIC. D VOX also has to be enabled. Good luck!
    [​IMG]


    Also, you may want to check this link out:

    https://ruthner.at/wp/2014/12/yaesu-ftdx-3000-winmor-winlink/

    Best 73,

    Lou, KJ3LR
     

Share This Page