Kenwood RC-2000 Remote Face Plate Mobile Kit

[W5CGP]

Hello fellow Amateurs

I am fixing to purchase the TS-2000 and RC-2000 and was wondering if anyone could tell me the height and width dimensions of the Remote face plate?

Thank you
73
Ken Goddard W5CGP
Oklahoma City, Ok.

[W8KRF]

I have both. The RC-2000 control unit is 5-1/2"W x 2-3/8"H. With the mount mine is about 3-1/4"H (off the dash). I like the setup but it took me a while to learn how to access a lot of Fn's.

Good luck...GREAT RIG!!!!

Carl, W8KRF

[W5CGP]

Good morning Carl..
Thank you so much for your reply. It is smaller than I had thought it would be. I have heard it is the same remote as the one's for the TM-D700 and the TM-V708A is this correct? I also heard that some of the functions vary with the remote on some of these radios.
What are your thought?

73
Ken W5CGP

[IW9CTR]

I use for my ts-2000X for remote the frontaline of tm-D700 (is the same of rc-2000). GREAT RADIO

[w7auw]

Quote[/b] (W5CGP @ June 02 2006,08:31)]Hello fellow Amateurs

I am fixing to purchase the TS-2000 and RC-2000 and was wondering if anyone could tell me the height and width dimensions of the Remote face plate?

Thank you
73
Ken Goddard W5CGP
Oklahoma City, Ok.
It's exactly the same as the tmd-700a in fact they are interchangeable. I have 2 d-700's and have a b-2000 mounted in my f-150 w/the remote head. I love them all. Also have a ts-2000 in the shack and the thd7(ag). What a joy it is to operate them all. Faceplate r/c head is about 5 1/4"x 2 1/2".