PDA

View Full Version : Microphone mod needed

W8NSI
05-20-2005, 11:49 PM
I need the schematic and pinout of the microphone from a Radio Shack 2 mtr rig. I am trying to adapt it to my Tentec Jupiter to use as a hand mike.
N3ATS
05-20-2005, 11:53 PM
Which model RS rig sir?
W8NSI
05-21-2005, 12:01 AM
Quote[/b] (N3ATS @ May 20 2005,16:53)]Which model RS rig sir?
How many models of 2 METER mobile rigs did Radio Shack have? I do not know. All I have is the microphone and it has no labels on it saying what model it came from. The radio it came from was physically mangled and I salvaged the mike before the rest of it hit the dumpster. The mike has the remote control buttons and dtmf keypad. It has one of the tiny condenser mike elements and the electronics to power it, thus I need a schematic to see how it is powered, etc...
W8NSI
05-21-2005, 12:04 AM
The mike connector on it has eight pins, 7 around the circle and one in the middle.
N3ATS
05-21-2005, 01:38 AM
Sounds like the HTX-252 model.

This should be what you need.

http://www.hamanuals.com/MMans/HTX252MIC.pdf
W8NSI
05-21-2005, 04:45 AM
Quote[/b] (N3ATS @ May 20 2005,18:38)]Sounds like the HTX-252 model.

This should be what you need.

http://www.hamanuals.com/MMans/HTX252MIC.pdf
Thank you! This looks exactly like what I need!

73 de w8nsi Jim
N5RLR
06-14-2005, 05:47 PM
Quote[/b] (N3ATS @ May 20 2005)]<span style='color:green'>This should be what you need.

http://www.hamanuals.com/MMans/HTX252MIC.pdf</span>
Check out SW302 on that schematic. Must be for occasional irregularity... http://www.qrz.com/iB_html/non-cgi/emoticons/tounge.gif
kg4yus
07-06-2005, 01:01 AM
Quote[/b] (N5RLR @ June 14 2005,12:47)]Quote[/b] (N3ATS @ May 20 2005)]<span style='color:green'>This should be what you need.

http://www.hamanuals.com/MMans/HTX252MIC.pdf</span>
Check out SW302 on that schematic. #Must be for occasional irregularity... #http://www.qrz.com/iB_html/non-cgi/emoticons/tounge.gif
Too funny http://www.qrz.com/iB_html/non-cgi/emoticons/biggrin.gif