TenTec Century 22

[Ka0zjo]

My little Century 22 is one of my favorite rigs and while I thought the finals were dead I was wrong. Turned out a jumper went south and after rebuilding all my RG-8 jumpers it once again is developing power.
My question is that when I was inside the rig looking for a bad solder joint I noticed the finals are supposed to be MRF475's and turned out to be Mitsubishi C1969 Power Transistors.
I searched the web looking for specs and could not find any at all. Does anyone here know what the difference is and the frequency range of the C1969?
The reason I am asking is I get near full power on all bands except 80 and the C1969 sure seems to work well overall. Thanks to anyone who may know. #Bob

[PA5COR]

Found some spec's

Part Number 2SC1969
Military/High-Rel N
V(BR)CEO (V) 25
V(BR)CBO (V) 60
I© Max. (A) 6.0
Absolute Max. Power Diss. (W) 1.7
Maximum Operating Temp (шC) 150х
I(CBO) Max. (A) 100uШ
@V(CBO) (V) (Test Condition) 30
V(CE)sat Max. (V)
@I© (A) (Test Condition)
@I(B) (A) (Test Condition)
h(FE) Min. Current gain. 10
h(FE) Max. Current gain. 180
@I© (A) (Test Condition) 10m
@V(CE) (V) (Test Condition) 12

It is basically the same as the 2sc2312.

Used mainly in C.B stuff.

Hope this helps,

73's

Cor