PDA

View Full Version : A New Morse Character


kd5icr
12-13-2003, 09:17 PM
From ARRL:

INTERNATIONAL MORSE CODE GETS NEW ITU HOME, NEW CHARACTER

The 2003 World Radiocommunication Conference (WRC-03) may have eliminated
the treaty requirement for prospective amateurs to demonstrate Morse code
proficiency to gain HF access, but the International Telecommunication
Union (ITU) hasn't forgotten Morse code altogether. In Geneva on December
5, the ITU Radiocommunication Sector (ITU-R) Study Group 8 agreed on the
wording of a Draft New Recommendation ITU-R M.[MORSE] that specifies the
international Morse code character set and transmission procedures. It
also includes a new Morse code character to cover the "@" symbol used in
e-mail addresses.

Once it's made available in English, French and Spanish, the draft new
recommendation will go out to ITU member-states using a new procedure for
simultaneous adoption and approval. On December 3, the draft new
recommendation won the approval of Working Party 8A, which is responsible
for the Land Mobile and Amateur services.

Within the ITU, the international Morse code has been defined by the
Telecommunication Standardization Sector (ITU-T), which is responsible for
the public telephone and telegraph network--mostly landline. A couple of
years ago, the ARRL pointed out to the US delegation to the ITU
Radiocommunication Advisory Group that Morse code's role more properly
resides in the radiocommunication realm, not wire, and should be the
responsibility of ITU Radiocommunication Sector (ITU-R).

The transfer was agreed to, and International Amateur Radio Union (IARU)
President Larry Price, W4RA, proposed the draft new recommendation at the
November-December Working Group 8A meeting. The draft new recommendation
is almost unchanged from its ITU-T text.

"No one wanted to disturb something with more than 150 years of history,"
said ARRL Technical Relations Manager Paul Rinaldo, W4RI.

To keep up with the times, however, the IARU proposed adding a new
character--the commercial "at" or @ symbol--to permit sending e-mail
addresses in Morse code. The draft new recommendation proposes using the
letters A and C run together (.--.-.) to represent the @ symbol.

While the draft new recommendation is still a working document, its
expected to become a Recommendation within six months or so, pending
approval by member-states.

ae4fa
12-13-2003, 09:35 PM
Well, at best, it was the PC thing to do. However, simply sending the word "at" seems more efficient.

w3sy
12-13-2003, 09:35 PM
Good idea!

ai4ep
12-13-2003, 10:49 PM
http://www.qrz.com/iB_html/non-cgi/emoticons/confused.gif ......and how many years has this been in the making ? http://www.qrz.com/iB_html/non-cgi/emoticons/confused.gif

ai4ep
12-13-2003, 10:52 PM
http://www.qrz.com/iB_html/non-cgi/emoticons/biggrin.gif yep...there is ANOTHER character that those folks that can NOT learn morse code not to learn. I suppose that means that the " 5 wpm morse code requirement " is NOT quite a " thing of the past " ( since they keep adding new things for C W users to learn and use...good idea ! ).Another BOLD step forward for AMATEUR radio !! http://www.qrz.com/iB_html/non-cgi/emoticons/tounge.gif http://www.qrz.com/iB_html/non-cgi/emoticons/biggrin.gif http://www.qrz.com/iB_html/non-cgi/emoticons/smile.gif

n5tjd
12-13-2003, 11:07 PM
Hey... I can understand at an effective wpm of 15, admitedly, I make mistakes, but I'm getting better. Its not hard when the characters are mainly letters.

Anyhow, I always assumed you would just say the following...
"davistj at bluebonnet.net" I mean, I think ".- -" is faster than #
".--.-." Then again, using the AC symbol would remove all doubt about it... Still, nice to see morse being discussed and a new character added.

N8CPA
12-14-2003, 02:39 AM
There was already a symbol for @, ..-..

It was also used for the Swedish e. Maybe they had to come up with something new for Swedish email addresses.

I've tried sending AC .--.-. and with my dexterity, I always mess it up. The weird thing is I send it OK if I think of it as WR. With apologies to the Gershwins,
"You say VA,
I say SK..."


http://www.qrz.com/iB_html/non-cgi/emoticons/biggrin.gif

ki4bgo
12-14-2003, 02:54 AM
@ means "at" ...so why didn't they make it "a & T" instead of "a & C"? http://www.qrz.com/iB_html/non-cgi/emoticons/confused.gif http://www.qrz.com/iB_html/non-cgi/emoticons/confused.gif

w5alt
12-14-2003, 03:05 AM
Maybe because .-- is W?

12-14-2003, 06:19 AM
I see a few ill omens in it... for one, the IARU could be "testing" their ability to control the rules regarding code, and once they are satisfied that they have the power, then who knows where they will go with it. Second, adding a new character could be an attempt to make code more difficult, thus leading to more people being alienated against it. In my opinion, we need to get rid of some of the excess prosigns, and make code a little bit simpler and easier, not the other way around....

w5alt
12-14-2003, 12:46 PM
Yes, you're right. All we really need are E's and T's. Then we can arrange them in varous orders to create encoded messages. Having only E's and T's would make learning CW much easier for the new people and prevent the IARU and it's head henchmen in the ARRL from controling something as sinister as Morse.

ai4ep
12-14-2003, 01:06 PM
http://www.qrz.com/iB_html/non-cgi/emoticons/smile.gif guess morse code aint as "dead " as some folks would want us to think.....* i hate it when folks lie to me and i hate it even more when I catch them at it * http://www.qrz.com/iB_html/non-cgi/emoticons/mad.gif

n0ov
02-27-2004, 09:46 PM
New Morse Character

Hopefully some of the Characters who thing the FCC will move quickly on the licening changes will hit the books, learn some code and get on the air.

Have a great weekend all

KB1GYQ
02-28-2004, 05:08 AM
'E's and 'T's? No, it's 'T's and zeros (American Morse).