end times

[W6GMP]

ever time I correct the end times,:eek: it flags the QSO



This needs to be corrected:mad::eek:

[W6GMP]

some of the end times have the QSO lasting hour or even days. Am I the only one looking at the end time???:confused:

[K2DSL]

I validate based on the call sign, QSO date/time displayed in the main log grid, the band or frequency and the mode. It is the same thing you'd validate with if you submitted QSL cards to the ARRL for WAS or DXCC. I don't look at the details of each incoming QSO beyond the above.

[W6GMP]

So now that there are flags on those QSO, Will I ever get another chance to conferm them for the people. QRZ need to address the end time issue, this by itself will keep me from Subcribing. :eek:

[AB0XE]

Alot of my entries are portable so I enter them when I get home.
I see that my end time is the day I enter the QSO in the log,
I would also like to be able enter my correct end time .
and I am a subscriber
Steve

[W7JZE]

Alot of my entries are portable so I enter them when I get home.
I see that my end time is the day I enter the QSO in the log,
I would also like to be able enter my correct end time .
and I am a subscriber
Steve

Hi Steve, et al...

There is a box you can check that says "Show QSO end time". See my screen shot below:
http://forums.qrz.com/picture.php?albumid=819&pictureid=5847

If you have existing QSOs in the QRZ logbook currently with the wrong end time then just:

Open that QSO entry
Click "EDIT"
Select "Show QSO end time"
Edit QSO end time
Save & Exit
Simple... unless the QSO has been CONFIRMED. As far as I can tell, once a QSO is CONFIRMED in the QRZ Logbook, then it is LOCKED. That makes sense to me but places more responsibility on getting it right the first time :).

Good luck with your changes.

[N4HUS]

Hi Steve, et al...

There is a box you can check that says "Show QSO end time". See my screen shot below:
http://forums.qrz.com/picture.php?albumid=819&pictureid=5847

If you have existing QSOs in the QRZ logbook currently with the wrong end time then just:

Open that QSO entry
Click "EDIT"
Select "Show QSO end time"
Edit QSO end time
Save & Exit
Simple... unless the QSO has been CONFIRMED. As far as I can tell, once a QSO is CONFIRMED in the QRZ Logbook, then it is LOCKED. That makes sense to me but places more responsibility on getting it right the first time :).

Good luck with your changes.
Hate to burst your bubble, but when I click "show end time" I DO NOT get a new field the says <QSO end>. All that shows up is <QSO Start>. Any ideas ?? 73, Art