Kenwood tm-d710 TNC questions

[kd8fre]

Hi.
I have a kenwood tm-d710a and am trying to use packet. when i connect it to my computer with the kenwood pg-5g cable, i can see and command the TNC, but it will not transmit any packets from the radio. If you know a fix for this, please let me know.

Thanks and 73
Russ
KD8FRE

[WT9S]

Have you enabled the TNC by pressing the TNC button on the rig?

[kd8fre]

Yes I have enabled the tnc
I have spent quite a bit of time on the phone with Kenwood trying to resolve this, and I have no clue as to what the issue is.

73 de KD8FRE

[KA1MDA]

I have no idea if this will help or not- but I have had similar problems using the internal TNC on my Kenwood TS-2000X as well as using an external TNC with my TM-V71A.

Check the setting of the TNC's SQUELCH command. YOu can check it by typing SQ and hitting the ENTER (or RETURN) key. Format for this command should is: SQ ON or SQ OFF.

The SQ command sets the state of the squelch line on the radio's DATA connector, which in turn tells the radio if it's ok to transmit or not. I think Kenwood uses line states (HIGH/LOW) that appear to be opposite from Icom and some other radios. My TNC was working fine with an Icom radio, but would not TX with the Kenwood. Reversing the state of the SQ signal fixed the problem.

So type in SQ [ENTER] and check the result. If it says ON, type in SQ OFF [ENTER] (or vice-versa) and give it a try and see if it transmits.

Good luck, de Tom, KA1MDA
www.ka1mda.org

[ke6anm]

is xmit ok turned on in tnc

[kd8fre]

I cannot find this command in the list of available commands for this tnc, would it be under another command name?

Thanks
Russ
KD8FRE

[kd8fre]

I thank those who have responded, but none of these seem to be the issue. I am running APRSPoint software for APRS, this software requires the TNC to be in Packet Mode, not APRS mode, and this software transmits and recieves just fine! I am stymied as to what the issue could be. I have tried doing a complete reset on the TNC, and that does not solve the issues.

Thanks and 73
Russ Long
KD8FRE
ARCARS Assistant Program Manager